Hello!
How do I automount my Plextor UltraPlex 40max SCSI CD-ROM?
Have a Advansys SCSI controller and the CD-ROM is the only unit connected
Help anyone, I`m new to Linux so go easy on me :)
Lars V
How do I automount my Plextor UltraPlex 40max SCSI CD-ROM?
Have a Advansys SCSI controller and the CD-ROM is the only unit connected
Help anyone, I`m new to Linux so go easy on me :)
Lars V
> How do I automount my Plextor UltraPlex 40max SCSI CD-ROM?
> Have a Advansys SCSI controller and the CD-ROM is the only unit connected
> Help anyone, I`m new to Linux so go easy on me :)
--
Lasse Jensen [fafler at linuxmail dot org]
I'm having a bit of trouble getting the above to work correctly with
cdparanoia (the problem isn't necessarily exclusive to cdparanoia,
though). When ripping a CD, the drive gives me 20x for about the first 5
tracks. After that, the drive starts to slow down and speed up again
sporadically - presumably switching from CAV to CLV when hitting a
dirty/scratched part of the CD. This in itself isn't a problem, but the
SCSI bus seems to be completely locked for anything up to 5 seconds
every time the speed changes. Most annoying. There doesn't appear to be
any kind of error message, either. Unfortunately, being an incompetent
fool, I had trouble getting SCSI logging to work (compiled it into the
kernel and did the 'echo "scsi log error/scan/mlqueue/..." >
/proc/scsi/scsi' - no joy) so I haven't got any more detailed
information :(.
Any ideas?
Scsi card: Adaptec 2940U2W
Kernel: 2.2.13 SMP (2 processors)
3. How to mount SCSI Plextor 4Plex CD-ROM, SCSI ID-2
4. Stealing accounts and Virus programming (Re: LINUX AND NETBSD...)
6. quotas on 2.2 hangs logins on 4.x ?
7. Trantor T130B SCSI Adapter & Texel/Plextor 5240 CD-ROM: HELP!
8. multiple partitions on one disk
9. Plextor PX-43CS SCSI-2 CD-ROM?
10. Plextor SCSI 8x CD-ROM drive
11. Upgrading to SCSI CD-ROM from IDE CD-ROM
12. Can't install Yggdrasil summer 94 CD-ROM with SCSI-1 CD-ROM