by Antti Tuom » Mon, 23 Feb 1998 04:00:00
Okay.. the problem is this. I just bought a Telewell ISDN passive card,
product of Easytel Oy. It works perfect under w95 and such, but under
linux i cannot find drivers for it.
So if somebody has drivers to Telewell passive ISDN card, please send me
1. Need help with a Telewell ISA-ISDN passive internal card
I managed to get this card to be recognized by Linux 2.1.120 and HiSax, by
using the TeleInt driver and IRQ 4. All the other IRQs behaved as follows:
"
TeleInt: IRQ x count 0"
TeleInt: IRQ x count 0"
TeleInt: IRQ x getting no interrupts during init 1
TeleInt: Resetting card
"
...and the system collapses.
IRQ 4 works only, when the driver is not compiled to the kernel and when it
is not insmod'd at the boot. (if /etc/modules has a line "hisax", it crashes
the system like above).
With IRQ 4 and Debian 2.0's isdnutils, I tried an asyncPPP connection. ATZ
returned OK, AT&Exxxxxx returned OK, but ATDxxxxxx just waited for the
CARRIER.
Also, when using IRQ 4, the card seizes both ISDN lines, even when I'm not
connected. If I take off the modem's cable, the lines are restored to
normal. This happens when insmodding the driver; rmmodding doesn't help.
And now for the worst part: It works perfectly well under Windows 98. 98's
driver is for "Intec SIC" card, so if some of you got that working for
Linux, please write me.
--
2. C&T 65548 not recognize by XF86Config !
3. Problems with a telewell ISDN passive card
4. killall -STOP xclock... hangs filesystem
7. Linux support for Eicon Diva 2.0 Pro ISDN card?
8. Suitable IP adresses for internal network
9. Primary Rate ISDN Card support for Linux
10. **HELP : looking for linux router supporting ISDN card
11. Linux supported PRI ISDN cards??
12. ISDN cards supported by Linux?