IBM 8514 monitor running 1024x768

IBM 8514 monitor running 1024x768

Post by KROESSCHEL » Fri, 24 Mar 2000 04:00:00



Hi,
Troubles getting the an old monitor running anything else that 640x480. I
used sax on suse 6.1 s3 virge agp graphic card 4mb.
according to the docs that I found on the web the monitor has
hor 35.5-35.5  and vert 60-70 I entered these into the advanced monitor
settings since the 8514 is not in the list.
how can I get to the 1024x786 in 87hz interlaced
 
 
 

IBM 8514 monitor running 1024x768

Post by Andrew Daugherit » Fri, 24 Mar 2000 04:00:00



> Hi,
> Troubles getting the an old monitor running anything else that 640x480. I
> used sax on suse 6.1 s3 virge agp graphic card 4mb.
> according to the docs that I found on the web the monitor has
> hor 35.5-35.5  and vert 60-70 I entered these into the advanced monitor
> settings since the 8514 is not in the list.
> how can I get to the 1024x786 in 87hz interlaced

Actually this should be HorizSync 31.5, 35.5 because it's mulitple fixed
freq.  (There's even a setting in xf86config and XF86Setup for this.)  You
ALSO need to set Vert 60-90 or so because with your 60-70 it cuts off the
87Hz Interlaced.

 
 
 

IBM 8514 monitor running 1024x768

Post by KROESSCHEL » Fri, 24 Mar 2000 04:00:00


Thanks,
this solved my problem, it doesn look to bad either 1024x786 87hz
interlaced, probably because the fosfor(ish) layer.


>> Hi,
>> Troubles getting the an old monitor running anything else that 640x480. I
>> used sax on suse 6.1 s3 virge agp graphic card 4mb.
>> according to the docs that I found on the web the monitor has
>> hor 35.5-35.5  and vert 60-70 I entered these into the advanced monitor
>> settings since the 8514 is not in the list.
>> how can I get to the 1024x786 in 87hz interlaced

>Actually this should be HorizSync 31.5, 35.5 because it's mulitple fixed
>freq.  (There's even a setting in xf86config and XF86Setup for this.)  You
>ALSO need to set Vert 60-90 or so because with your 60-70 it cuts off the
>87Hz Interlaced.

 
 
 

1. IBM 8514 / Diamond Stealth VRAM: 1024x768 ?

Hello,
   I've just installed RedHat 5.0, and I can't seem to get
my X windows to run in anything above 640x480x256.  I'm guessing
that my problem is the monitor timings - If I choose a
different monitor in Xconfigurator, it allows me to select
1024x768x256 mode.  I've been running the combo (8514 & Stealth)
in 1024x768x256 on other OS for 5 years now, and I'd like to get it
going in X.  Can anyone supply me with monitor timing information,
or suggest anything else?  I'd manually set it up, but I have
no data on my monitor and can't get anything intelligible from
IBM.  I asked their customer service for help, and they had no
idea what monitor timings were!  (I got a couple of bits of info
after I explained to them exactly what kinds of numbers to look
for, but not enough.)

Does anyone have the proper config for an 8514 in this mode, or
am I out of luck?
                        -Drew

2. NT to Linux porting tools

3. IBM 8514 monitor specs?

4. modem cage-match

5. IBM 8514 Monitor and Metro X

6. MD5 password hash

7. Monitor section for IBM 8514

8. Sparc and PLIP

9. Please, someone with IBM 8514 PS/2 Color Monitor...

10. IBM 8514 Monitor

11. IBM 8514 monitor

12. Wanted: IBM 8514 monitor specs etc.

13. IBM 8514 monitor specs?