This is a multi-part message in MIME format.
--------------556E1B9BE13637DDEACB3DBD
Content-Type: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Transfer-Encoding: 7bit
I have the Rocketport ISA 8 Octacable installed in a Linux Slackware
3.1.0 (Kernel 2.0.0) system. Hardware is an Ambra 486 DX2/66, 32Mb
RAM. Using both uugetty and the most recent mgetty+sendfax on these
ports I cannot connect at higher than 9600 baud. If I move the same USR
Sportster 56k x2 modem to a built-in serial port (16450) and keeping all
configs the same I can reach
33.6k consistantly.
Also (related?) I try to look at the port speed with `stty -a <
/dev/ttyR1` and the process hangs. CTRL-z and killing it is the only way
out. I have tried setrocket spd_[normal thru warp] /dev/ttyR1 with no
change in success.
Please help...
Thank you,
-Jere
--------------556E1B9BE13637DDEACB3DBD
Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Julian, Jere
Content-Disposition: attachment; filename="vcard.vcf"
begin: vcard
fn: Julian, Jere
n: Julian;Jere
org: LADD Upholstery Group
adr: ;;;;;;
title: Network Administrator
tel;work:
tel;fax:
x-mozilla-cpt: ;0
x-mozilla-html: TRUE
end: vcard
--------------556E1B9BE13637DDEACB3DBD--