wvdial problems

wvdial problems

Post by patric » Sun, 31 Dec 1899 09:00:00

hi there,

im trying to connect to the internet using debian and wvdial.

i have established a nameserver configuration file, and created
a link from the serial port connected to the modem to /dev/modem.

my reference then suggests the following two commands

1.  type in - route del default
     output -     SIOCDELRT: No such process

2. type in - wvdial
    output - cannot open /dev/modem: Input/output error

anyone with any suggestions?



wvdial problems

Post by John Hasle » Sat, 14 Oct 2000 11:20:39

Quote:patrick writes:
> anyone with any suggestions?

You either have a winmodem or your modem is not on the serial port you
think it is on.

Try connecting to the modem with minicom.
John Hasler

Dancing Horse Hill
Elmwood, Wisconsin


1. RP3 (wvdial) Problem

I am running RedHat 7.2 with a USR controller modem model 5610. I set up my
dial up account in the RedHat Internet configuration program and it debugs
fine and everything looks good. But when I try to start the interface it
just sits there and doesn't appear to try to initialize the modem. Have I
left something out?


2. efax+US.Robutistic Sporter 14.4K data/fax modem

3. wvdial problem

4. real-time vs. user-time

5. address change

6. wvdial problem!

7. Anyone made a Trantor T160/T260 work???

8. wvdial problem

9. wvdial problem with my RH 8.0 Compaq Presario

10. WVDial problem

11. pppd and/or wvdial problems

12. Wvdial Problem with redial