Q: SPEA Mirage P64 PCI: Clockchip problem

Q: SPEA Mirage P64 PCI: Clockchip problem

Post by Christian Huebn » Thu, 21 Jul 1994 23:11:40



I use Linux on a new PCI-machine
equipped with a SPEA Mirage P64
board. I know the X-server (XS3-864)
runs fine with the board as I was
able to start X in the accelerated
640x480-Mode.

I tried to build myself a clock chip
setup-program for the ICS 2595 2e
clock chip, but without success so far.
I had only the info supplied in the
SVGADATA.PMI-file of my OS/2 driver.

So three questions:
1) Has anyone run Linux X11 successfully
   on the SPEA card or another card using
   the same clock chip?
2) Has anyone managed to acquire programming
   info on the chip, but has no time to write
   a driver himself?
3) Has anyone managed to drag exact information
   about the svgadata.pmi-file out of the IBMers?

If You can supply any info on the subject please
mail me an answer or post it!

Thanks a lot...

Chris



See ya... BTW: The NCR works fine now...

 
 
 

1. SPEA Mirage P64 (PCI)?

I use Linux on a new PCI-machine
equipped with a SPEA Mirage P64
board. I know the X-server (XS3-864)
runs fine with the board as I was
able to start X in the accelerated
640x480-Mode.

I tried to build myself a clock chip
setup-program for the ICS 2595 2e
clock chip, but without success so far.
I had only the info supplied in the
SVGADATA.PMI-file of my OS/2 driver.

So three questions:
1) Has anyone run Linux X11 successfully
   on the SPEA card or another card using
   the same clock chip?
2) Has anyone managed to acquire programming
   info on the chip, but has no time to write
   a driver himself?
3) Has anyone managed to drag exact information
   about the svgadata.pmi-file out of the IBMers?

If You can supply any info on the subject please
mail me an answer or post it!

Thanks a lot...

Chris



See ya... BTW: The NCR works fine now...

2. TCB on AIX 4.3.3

3. REQ:X-Config for SPEA Mirage P64 PCI

4. HP Colorado T4000s Tape Storage System

5. XF86Config for SPEA V7 Mirage P64 2MB PCI

6. Can't NFS Mount /home/stu on /home/stu

7. XConfig for Idek-Monitor and Spea Mirage P64 PCI

8. ipchains: icmp "port" 8 to "port" 0

9. X11 and SPEA V7 Mirage P64 PCI

10. Problems with SPEA Mirage P64 and MAG PA17S

11. Problem with SPEA Mirage P64 VL

12. Problems with Spea Mirage P64

13. Problems with Adaptec 1542CF/Spea Mirage P64