by David Sis » Sun, 31 Dec 1899 09:00:00
Regards,
Dave
by Vincent "Hefiz" Grau » Sun, 31 Dec 1899 09:00:00
Anyway, if you succeeded in configuring four disks in RAID 0+1, I'm
interested. Please mail.
Vincent
--
Posted via CNET Help.com
http://www.help.com/
by muzh » Fri, 10 Nov 2000 07:10:43
> Regards,
> Dave
cll
by Patrick Amiria » Sun, 31 Dec 1899 09:00:00
Quote:> Anyone familiar with this ABIT product or any other ABIT product? Their
> site (www.abit-usa.com) states that this device is supported by Linux, but
> the manual doesn't mention Linux, only Win9x and NT. Anyone using one of
> these in a Linux box? I've heard that ABIT makes quite good stuff, and
this
> board supports RAID0, RAID1, and RAID10 with up to 4 IDE drives, and is
less
> than $40, so it's very attractive. Please post or email!
> Regards,
> Dave
by Sung Y. Hon » Sun, 31 Dec 1899 09:00:00
> Anyone familiar with this ABIT product or any other ABIT product? Their
> site (www.abit-usa.com) states that this device is supported by Linux,
but
> the manual doesn't mention Linux, only Win9x and NT. Anyone using one of
> these in a Linux box? I've heard that ABIT makes quite good stuff, and
this
> board supports RAID0, RAID1, and RAID10 with up to 4 IDE drives, and is
less
> than $40, so it's very attractive. Please post or email!
> Regards,
--Quote:> Dave
by Sung Y. Hon » Sun, 31 Dec 1899 09:00:00
> it`s saying
> 1.Microsoft DOS 5.X and above
> 2.Microsoft Windows 95/98
> 3.Microsoft Windows 2000
> 4.Microsoft Windows NT4.0
> 5.ABIT Gentus 2.0 (Linux) <<<<------
> you have to use GENTUS not any Linux. Just GENTUS!
> > Anyone familiar with this ABIT product or any other ABIT product?
Their
> > site (www.abit-usa.com) states that this device is supported by Linux,
but
> > the manual doesn't mention Linux, only Win9x and NT. Anyone using one
of
> > these in a Linux box? I've heard that ABIT makes quite good stuff, and
> this
> > board supports RAID0, RAID1, and RAID10 with up to 4 IDE drives, and is
> less
> > than $40, so it's very attractive. Please post or email!
> > Regards,
> > Dave
by Sung Y. Hon » Sun, 31 Dec 1899 09:00:00
> Hello. I have the exact same request ; I'm searching for a RH 6.2 driver
> for my KT7R. I'll let you know here and by e-mail if I ever find
something.
> Anyway, if you succeeded in configuring four disks in RAID 0+1, I'm
> interested. Please mail.
> Vincent
--Quote:> --
> Posted via CNET Help.com
> http://www.help.com/
1. ABIT Hot Rod 100 RAID controller problem
I would like to install Red Hat 6.2 (CD distribution) to one disk connected
to Hot Rod 100, implies I don't want to use RAID (in my opinion RAID is not
implemented in high point 370 chip but in windows drivers). I am able to
install nothing due to the fact the install program after boot from CD
cannot find the disk connected to Hot Rod. I am not experienced Linux user
but I suppose I should load some Linux Hot Rod driver from the diskette
(similar like in NT or W2k installation) and I would like to find such
driver. Am I correct in my opinion? If I am correct, I will be very glad if
anybody could help me to find such driver and solve this problem.
Many thanks in advance
Petr
2. reconfiguring linux and win95 partitions
3. ABIT Hot Rod 100 Pro on Linux
5. Installation on ABit Hot Rod 100 Pro disk
6. Unix C++ Consultants Needed
7. "Hot Rod 66" IDE UDMA PCI controller (ABIT HA66 chipset)
8. How do I install IBM's Websphere from the Bonus Pack
9. Abit VP6 and Hotrod 100 IDE raid controller
10. Abit Hot Rod 66 card setup?
12. 66 to 100 GB Raid Under $5k Hot Swap Everything