floppies

floppies

Post by Melvin To » Mon, 10 Aug 1998 04:00:00



Hi there-

 I just install linux on a friend's machine and she's asking how to copy
to a floppy disk.  I just realized, I don't know how to copy files to a
floppy as a regular user!  I usually just mount the floppy to /mnt and
cp as root.  The files need to copy in dos format because they're using
X-terminals and Solaris server which will require a rcp command. I found
something called mcopy but I got all sorts of errors.  I did a mcopy
filename a: Any assistance would be most appreciated.

Thanks
Melvin

 
 
 

floppies

Post by Eric Trimm » Mon, 10 Aug 1998 04:00:00


[Posted and mailed]



Quote:> Hi there-

>  I just install linux on a friend's machine and she's asking how to copy
> to a floppy disk.  I just realized, I don't know how to copy files to a
> floppy as a regular user!  I usually just mount the floppy to /mnt and
> cp as root.  The files need to copy in dos format because they're using
> X-terminals and Solaris server which will require a rcp command. I found
> something called mcopy but I got all sorts of errors.  I did a mcopy
> filename a: Any assistance would be most appreciated.

> Thanks
> Melvin

Assuming it's a MSDOS formatted floppy; do you have the correct settings in
"/etc/mtools" ?
--
-------------------------------------------------------------

    of                     Web Address: http://et.trimmer.org
et.trimmer.org
-------------------------------------------------------------

 
 
 

floppies

Post by Ben Sandle » Mon, 10 Aug 1998 04:00:00



> Hi there-

>  I just install linux on a friend's machine and she's asking how to copy
> to a floppy disk.  I just realized, I don't know how to copy files to a
> floppy as a regular user!  I usually just mount the floppy to /mnt and
> cp as root.  The files need to copy in dos format because they're using
> X-terminals and Solaris server which will require a rcp command. I found
> something called mcopy but I got all sorts of errors.  I did a mcopy
> filename a: Any assistance would be most appreciated.

You need to insert the "user" option in the list of options in fd0's
entry in /etc/fstab.

HTH,
Ben

Quote:

> Thanks
> Melvin

--
Ben Sandler
email me: sandler at ymail dot yu dot edu

"Windows is an operating system, not a religion."
- Ted Waitt, chairman of Gateway

 
 
 

1. rescue floppy for LS-120/ATAPI floppy drive

My file system seems to have corrupted overnight running SuSE 7.1.  Not
sure if it rebooted (I have a UPS, but not monitored) or fell back to
runlevel 1 when it got stuck accessing the disk (possibly due to heat
which was only up to around 85 degress F).

When it tries to fsck my / during reboot it drops to single mode after:
hdb: dma-intr: error=0x40 {Unrecoverable Error}, LBAsect=14771969,
sector 14681184
end_request: I/O error, dev 03:45 (hdb), sector 14681184
Error reading block 1835748 (Attempt to read block from filesystem
resulted in short read) while doing inode scan.

Anyway I made a tomsrtbt rescue floppy and it boots from a
standard floppy drive on the computer it was created on, but not the one
with the problem.  It correctly identifies hdc as LS-120, ATAPI floppy
(the floppy being booted from) and hdd as DVD-ROM, but later hangs
during or after a partition check of hdc (which has no partitions).

I could install another copy of SuSE on empty space on that hard drive,
but is there a rescue floppy version that can boot from an ATAPI floppy?

--
David Efflandt  (Reply-To is valid)  http://www.de-srv.com/
http://www.autox.chicago.il.us/  http://www.berniesfloral.net/
http://cgi-help.virtualave.net/  http://hammer.prohosting.com/~cgi-wiz/

2. tcsh + ES/9000 - AIXESA compile?

3. searching scsi floppy driver to read dos floppies for sol 2.4

4. logging traffic per IP

5. use floppy when boot linux by boot floppy

6. Ram question

7. Boot floppy/root floppy to ramdisk, add more later?

8. intel 740 & linux

9. Making custom boot floppies without a floppy.

10. floppy? what floppy?

11. windows floppy & linux floppy

12. Making a bootable Linux floppy with root on the floppy

13. floppy.c vs. ide-floppy.c