Have you seen this problem ?

Board index Linux

Have you seen this problem ?

by b.. » Sun, 31 Dec 1899 09:00:00

Hello:
I have a loadable driver for a RedHat 7.0. I have noticed that _all_
task structures have a NULL struct mm pointer in them. This NULL pointer
causes pgd_offset() calls to crash. Any idea why this pointer is not
initialized ? I run the same driver on older Linux with no problem.
Any suggestions will be of great help at this time.
- Ben

Sent via Deja.com http://www.deja.com/
Before you buy.

Top

1. Having problems getting the Adaptec 1522b (ISA) seen

I've been trying to get our new AHA-1522B to work without
success, it is the plug/play version. In the past I had
no problem with IN2000 or AHA-1542 some problems with both
the AHA-2840/42 (very slow since version 2.0.0) and AMD53C974
but were always get them to work. This time I can't even see
the controller. When the system boots and before LILO loads
it sees the controller and the connected devices but that is
it. I built the kernal several times to no end. I also stripped
the machine down to the bare minimum (no other controller the
the execption of the builtin ones IDE and floppy)

Has anyone else seen this problem.

Thanks

James

2. S70 hangs,

3. Why the memory seen in Linux differs from the one seen in BIOS

4. Linux Router Project (LRP) problem

5. W95 sees all 96MB, Linux only sees 64MB?!

6. RPC Byte ordering

7. Memory=32 ..system sees 32MB Linus sees 16 only

8. Linux word processor

9. FreeBSD newbie having ISP connect problems - route problem

10. I'm having host problems (null)~# and SLIP problems