Very Computer

Has anyone had a problem writing a 700MB/80Min CD-recordable disk with
X-CD-Roast and cdrecord 1.8.1? I can write generic 74Min CD-R's without
any problem, but when I switch to 80Min CD-R's I get the following error
from cdrecord:

cdrecord: Cannot get disk type.

Thanks in advance,

-Brian

Sent via Deja.com http://www.deja.com/
Before you buy.

No problem here with the 80 min cd-r even in multi-session mode.  My noname
disks were mfg by CMC; probably cdrecord couldn't identify the mfg on
your disks as it does some checking for something or other. Try some other
cheapos since they are cheap now.

Actually Paul, I'll forward the entire error message. It does seem to
know the manufacturer (which is CMC) but still has a problem. Let me
know if this means anything to you.

This time I actually received a different set of errors.

Thanks a lot.

-Brian

pregap1: -1
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J?rg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MITSUMI '
Identifikation : 'CR-2801TE       '
Revision       : '1.07'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 409600 = 400 KB
FIFO size      : 16777216 = 16384 KB
Track 01: data  522 MB         padsize:  30 KB
Total size:     600 MB (59:28.21) = 267616 sectors
Lout start:     600 MB (59:30/16) = 267616 sectors
Current Secsize: 2352
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: 3
ATIP start of lead in:  -11634 (97:26/66)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 92233
Starting to write CD/DVD at speed 2 in write mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
CDB:  52 01 00 00 00 FF 00 00 1C 00
cdrecord: Input/output error. read track info: scsi sendcmd: retryable
error
Sense Bytes: 70 00 03 00 00 00 00 06 00 00 00 00 02 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Key: 0x3 Medium Error, Segment 0
cdrecord: Input/output error. close track/session: scsi sendcmd:
retryable errorSense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
status: 0x2 (CHECK CONDITION)
Sense flags: Blk 0 (not valid)
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
error
cmd finished after 124.099s timeout 240s
status: 0x2 (CHECK CONDITION)
Writing  time:  124.136s
Fixating...
CDB:  5B 00 02 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 10 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x10 Qual 0x04 (id crc or ecc error) [No matching qualifier]
Fru 0x0Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
Fixating time:    0.004s
CDB:  55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
cmd finished after 3.454s timeout 40s
cdrecord: fifo had 511 puts and 0 gets.

Sent via Deja.com http://www.deja.com/
Before you buy.