Very Computer

1. jumpers for ide card

I have an IDE controller (multi io) card I want to use as a secondary
controller.

I need to set it's IRQ to 15 and Port address to 170h - 177h

The problem is I don't know what the jumper settings are. Can anyone help ?

The card looks prety standard. It has UMC controller chips on it, it has
parallel, serial, game, FDD, and HDD connections.

The jumpers that it has are:

        j1   ..
        j2   ..  (This one is used for the HDD light on the front of the
case)
        jp1  xx.
        jp2  xx.
        jp3  xx.
        jp4  xx.
        jp5  xx.
        jp6  xx.
        jp7  xx.
        jp8  xx.
        jp9  xx.
        jp10 xx.

NB  xx indicates current jumpers
    "." represents and empty pin

If anyone can help that would be fantastic

thanks

Wilson

2. RAID 5 and performance

3. jumper settings for ide card

4. ipv6 routing and neighbour discovery

5. Jumper-less IDE-controler

6. APACHE 0.8.11-Imagemap Configuration Problem

7. IDE Hard Drive jumper settings for RAID

8. Best platform to learn Unix on ?

9. Hard Disk Jumper Question on Maxtor IDE as second disk

10. ide cdrom, scsi disks - jumper question

11. description of jumpers for WD Caviar IDE disk?

12. Kentech vlb ide KJD-IDEIOVLB jumper setting?

13. Cannot Read From/Recognize IDE CD-Rom for Setup; Jumper Settings?