Very Computer

I've found some source code, but i can't execute the resulting binary

  kernel: no symbol named 'anoninfo'

Do i need a special version of 'top' or do i have to do some other
changes to the system ?

.... Daniel

Visit http://www.sunfreeware.com/, where you'll
find executables of many popular utilities.

Eric.

The solaris FAQ says:

*2.3) What Software is available for Solaris 2.x?

    Most commercial software that ran on 4.x either will run in BCP
    mode, or is available for Solaris 2.x, or is being ported now.
    Solaris 2.3 BCP mode finally supports statically-linked executables.
    Solaris 2.5 BCP mode supports mixed mode (part static, part dynamic)
    executables too.

    Sun's web pages contain a searchable index
            <http://catalyst.sun.com/>
    of commercial software and a link to an outside contractor
            <http://www.sunfreeware.com>
    who gathers free and public domain programs.  Sun's own software is
    also prominently featured at www.sun.com.
            <http://www.sun.com/software>

    A list of freeware (some "public domain", but mostly copyright-
    but-freely-distributable) [as well as commercial software??]
    that has been ported to Solaris 2.x
    is posted monthly to the newsgroup comp.unix.solaris by

            Subject: Solaris SW list.  Monthly Post.
            <ftp://sheffield.isl.sri.com/pub/solaris/solaris-sw-list.txt>

    Some software that invariably needs minor tweaking after an OS upgrade
    is included here specially.  It's almost always necessary to recompile
    it after an OS upgrade, but if that still doesn't give a working
    version, make sure you check the archives for the latest version:

    SymbEL/SE performance monitor
            <http://www.sun.com/sun-on-net/performance/se3/>
    Top - a process monitor
            <ftp://eecs.nwu.edu/pub/top/>
    Site carrying the latest version of Top
            <ftp://ftp.groupsys.com/pub/top/>

    Lsof - list open files
            <ftp://vic.cc.purdue.edu/pub/tools/unix/lsof/>

    Identd - a daemon that implements RFC1413
            <ftp://ftp.lysator.liu.se/pub/ident/servers/>

    scsiinfo - a program that lists SCSI devices.
            <ftp://ftp.cdf.toronto.edu/pub/scsiinfo/>

    sysinfo - a system hardware information program.
            <http://www.magnicomp.com/sysinfo/>

    If you use gcc, it is important to remember that you must re-run
    fixincludes or re-install gcc after an OS upgrade, unless you run
    gcc 2.8 or later, or you'll be compiling with the old include files
    which will essentially give you the above programs as if compiled
    for a previous OS release.

    --- end of excerpt from the FAQ

Questions marked with a * or + have been changed or added since
the FAQ was last posted

The most recently posted version of the FAQ is available from
<http://www.wins.uva.nl/pub/solaris/solaris2/>
--
Expressed in this posting are my opinions.  They are in no way related
to opinions held by my employer, Sun Microsystems.
Statements on Sun products included here are not gospel and may
be fiction rather than truth.