Board index Solaris

Replacing a dead IDE cdrom on the blade 100?

Replacing a dead IDE cdrom on the blade 100?

Post by Jim Pennin » Wed, 12 Mar 2003 00:37:57




> Looks like the cdrom has died on a Blade 100 that I have access to as
> not one cd is being read in either OBP or via the console.
> Before I order just any cdrom, is there a recommended (other than the
> obvious (sun)) drive that can be used on the system, even a dvdrom?

Go look at http://sunblade.promonet.com.au/cache/1.html for the old
Blade FAQ and http://www.gekkou.co.uk/forum/list.php?f=1 for the current
forum to see what models others have successfully used.

I replaced mine with a Lite On DVD.

--
Jim Pennino

 
 
 
Top

1. Export Cdrom on Sun Blade 100 or Sun Blade 150

Has anyone successfully exported the cdrom on a Sb100 or SB150?  I have
tried and i cannot see the files on the cd.

Thanks,

2. FTP server port needed.

3. Blade 100: Dead ATA I/O if power management for disk turned on

4. Can I use the mouse wheel?

5. Replaced drive in Sun Blade 100 - getting "corrupt label"

6. What is causing my users to be locked out from telnetting in?

7. SCSI and IDE in a Blade 100 and a graphics question

8. Add POSIX Access Control Lists to ext2/3

9. Blade 100: DVD player for Blade + S8?

10. Boot Blade 1000 or Blade 100 into 32-bit mode OS

11. Can't read disk label while booting Blade 100 from CDROM (again)

12. blade 100 -> blade 150 -> next?

13. Can't boot Blade 100 from even internal IDE CD-ROM


All times are UTC
Board index