Where to get SLIP for Solaris 2.3

Where to get SLIP for Solaris 2.3

Post by Magnus Nasho » Thu, 16 Feb 1995 22:09:09

Well, is there anyone who can tell me where to get SLIP for Solaris 2.3? If
anyone knows how to install it too, that would be nice with some guidelines.
I've done it for Amiga and PC, but Solaris might be a little bit harder.

1. SLIP for Solaris 2.3: slip-solaris-3

I have been trying to use Bruce Orchard's slip-solaris-3 to make slip
connections from my Solaris 2.3 system.  So far I have been
unsuccessful, and wonder if anyone can help.

I tip into my slip server, which delivers the appropriate Internet
addresses (in dotted form).  Then I run slip-attach with these
addresses, and this completes fine.  But pinging the server then
fails, as does everything else.  The modem lights indicate that I am
sending out packets to the server, but I am not getting anything back.
Any pointers?

Two notes:
1) In a recent article by Jason Davis on PPP (Id no longer available),
he writes that for PPP it is necessary to tell the network how to
route packets back to the remote client using arp.  Perhaps the same
problem arises with SLIP?  If so, what kind of object is required for
the first argument in:
        arp -s ???? "Ethernet address of client" -pub
It doesn't accept the dotted Internet addresses delivered by the
server, but what else could there be?  Perhaps this is a blind alley.

2) In the slip dox, it states that the modem must not follow DTR
(AT&D0).  If your modem is set to do this, then the tip process grabs
the CPU and drives the load through the roof.  Killing tip returns
normality, but closes the modem connection.  I mention this, since I
wrestled with this for the longest time, and figure that there is
little reason for anyone else to.

Any help greatly appreciated -- Dave
Yeats on USEnet:
        Things fall apart; the centre cannot hold;
        Mere anarchy is loosed upon the world,
        The blood-dimmed tide is loosed and everywhere
        the ceremony of innocence is drowned;
        The best lack all conviction, while the worst
        are full of passionate intensity.

2. Help with the Canon BJ-10sx

3. HELP: Solaris 2.3 <---> Solaris 2.3 PPP link problems

4. Perl 5.001 Need in Linux/i386 exec format.

5. HELP: Solaris 2.3 <---> Solaris 2.3 PPP link Problems

6. g3 tower, with uw scsi, bootx trobles

7. SLIP for Solaris 2.3 or 2.4

8. Creating a Distrobution CD

9. SLIP for Solaris 2.3 - HOW? WHERE?

10. Slip for Solaris 2.3

11. SLIP for solaris 2.2 or 2.3?

12. Q: SLIP for solaris 2.3

13. SLIP for Solaris 2.3 - HOW? WHERE?