Very Computer

I found out that my Sparc 20 has one ISDN controller on board, but no
lines out of the box. If I do cat /dev/isdn I get some chars out of it
so I suspect that there is really one on board.

So I need information of :
How to connect from my mainboard to the ISDN line ?
Is this controller EURO ISDN ?
How to install this device as one network device ?
I like to do RAW HDLC or PPP.

Thanks Stephan

// A rainy day on a boat is better than a sunny day in the office

Quote:>Hi all,

>I found out that my Sparc 20 has one ISDN controller on board, but no
>lines out of the box. If I do cat /dev/isdn I get some chars out of it
>so I suspect that there is really one on board.

>So I need information of :
>How to connect from my mainboard to the ISDN line ?
>Is this controller EURO ISDN ?
>How to install this device as one network device ?
>I like to do RAW HDLC or PPP.

        Some pulse transformers, wire and a prom patcher.

Sold the pulse tranformers to the S0 in/out-put wires of the
BRI chip on the machine, then connect the other side of the
pulse transformer to the outlet of yout NT.

To make it work, you now only have to remove the symbol
"isdn-disabled" from your boot prom ;-)

Joerg

--



URL:  http://www.fokus.gmd.de/usr/schilling    ftp://ftp.fokus.gmd.de/pub/unix