??Question about sparc solaris commands to mount, read/write to usb memory jumpdrives/ USB memory stick

??Question about sparc solaris commands to mount, read/write to usb memory jumpdrives/ USB memory stick

Post by !!Tonnere de Bres » Sat, 09 Apr 2005 09:48:52



uname -a
SunOS  5.9 Generic_117171-15 sun4u sparc SUNW,Sun-Fire-V440

in  /var/adm/messages
Apr  5 12:38:47 quasar.EECS.Berkeley.EDU usba: [ID 855233 kern.info]

Apr  5 12:38:47 quasar.EECS.Berkeley.EDU usba: [ID 593373 kern.info]    LEXAR
MEDIA JUMPDRIVE ELITE 1069A303163338041204
Apr  5 12:38:47 quasar.EECS.Berkeley.EDU genunix: [ID 936769 kern.info]

Apr  5 12:38:47 quasar.EECS.Berkeley.EDU genunix: [ID 408114 kern.info]

Apr  5 12:38:47 quasar.EECS.Berkeley.EDU scsi: [ID 193665 kern.info] sd31 at
scsa2usb0: target 0 lun 0

Apr  5 12:38:47 quasar.EECS.Berkeley.EDU genunix: [ID 408114 kern.info]

ne
Apr  5 12:39:12 quasar.EECS.Berkeley.EDU usba: [ID 464422 kern.warning]

evice on port 1 failed



:scsa2usb

mount: /dev/usb/mass-storage0 not a block device

I followed suggestion at:
http://www.sun.com/io_technologies/USB-Faq.html

/etc/init.d/volmgt stop
format -e

/usr/sww/pkg/patchdiag-1.0.4/patchdiag -l | grep -i usb

INSTALLED PATCHES
Patch  Installed Latest   Synopsis
  ID   Revision  Revision
------ --------- -------- ------------------------------------------------------
115553    14        15    SunOS 5.9: USB Drivers and Framework Patch

prtconf -D | grep -i usb
        usb, instance #0 (driver name: ohci)
            storage, instance #0 (driver name: scsa2usb)
        usb, instance #1 (driver name: ohci)

Ap_Id                          Receptacle   Occupant     Condition  Information
When         Type         Busy     Phys_Id
c0                             connected    configured   unknown

c1                             connected    configured   unknown

c2                             connected    unconfigured unknown

usb0/1                         connected    configured   ok         Mfg: LEXAR
MEDIA  Product: JUMPDRIVE ELITE  NConfigs: 1\
  Config: 0  <no cfg str descr>

Thank you very much.
If you have any questions, please don't hesitate to contact me.
Thanks, Ghaouar Camij Toschian,
(please remove KeinSpam  from the email address )


Group / 386 Cory Hall / 510 643-6138
http://www-inst.eecs.berkeley.edu/~gct
Please don't send me attachment files.
Please include a meaningful subject in your email.