/usr/lib/snmp/snmpdx: [ID 702911 daemon.error]

/usr/lib/snmp/snmpdx: [ID 702911 daemon.error]

Post by polarbe » Sat, 03 Jul 2004 01:15:46



I have seen a number of people posted the same question I am about to
ask. I have yet to see a solution. Here are the symptoms:

On Solaris 8 V240.
When /etc/snmp/conf/snmpd.conf says:
system-group-read-community     public
read-community  public

Everything works.

When I change it to:
system-group-read-community     pUbLiC
read-community  pUbLiC

My console and /var/adm/messages fill with messages like the
following:

Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]
community_check();bad community from localhost
Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]
session_open() failed for a pdu received from localhost.32772
Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]
community_check();bad community from localhost
Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]
session_open() failed for a pdu received from localhost.32772
Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]
community_check();bad community from localhost
Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
daemon.error]

Others have pointed out that the box can be pinged but they can not
remote to the box. This is consistent with what I have seen. I can
recover with a boot into single user mode and change pUbLiC back to
public but I would like to change my community string. There are no
extra TABS or Spaces that I can see. Any ideas would be welcomed?

 
 
 

/usr/lib/snmp/snmpdx: [ID 702911 daemon.error]

Post by polarbe » Sat, 10 Jul 2004 21:47:34


I have not had any activity on this thread. Can one of you UNIX snmp
masters give me a hand with this issue?

-Ken

 
 
 

/usr/lib/snmp/snmpdx: [ID 702911 daemon.error]

Post by polarbe » Sat, 10 Jul 2004 22:10:59


Quote:> When /etc/snmp/conf/snmpd.conf says:
> system-group-read-community     public
> read-community  public
> Everything works.

> When I change it to:
> system-group-read-community     pUbLiC
> read-community  pUbLiC

> My console and /var/adm/messages fill with messages like the
> following:

> Jun 30 12:44:41 [hostname] /usr/lib/snmp/snmpdx: [ID 702911
> daemon.error]

This is what I found. Sun patch page for patch 108869-23 but the
problem with this new discovery is that I already had this patch.
(from 108869-23)

4889976 mibiisa unable to send traps to snmpdx
4935739 snmpdx receives the traps with community string "public"
4940928 mibiisa uses enterprise OID as 1.3.6.1.4.1.42.2.1.1
4958796 system services OID is not correct
4959348 master agent doesn't recognize other than "public" in the
snmpd.conf

 
 
 

1. /usr/lib/gcc-lib/i386-linux and /usr/lib/gcc-lib/i486-linux

Hi Linuxers,

I just got a new copy of gcc-2.4.5 and source code of the pl11.
After having done the installation of gcc-2.4.5, I realised that
I have an extra directory: /usr/lib/gcc-lib/i386-linux.
The question is whether I need to keep the old gcc stuff under
the i386-linux.  I really like to clean it up so as to save 5.1
meg disk space (another poor Linux user  ;-( ).

Your answer is very appreciated.  Please send answer directly
to my address or the corresponding interest parties to reduce
the network load.  Thank you in advance.

Wing



2. Kermit wierdness in an xterm

3. Tell "configure" to use /usr/local/lib/sparcv9/ instead of /usr/local/lib/

4. linux forgets about my pcmcia modem

5. /usr/openwin/lib/libtt.so vs /usr/dt/lib/libtt.so (and ttsession) ?

6. NFS - Can't mount

7. linking /usr/local/lib/* to /usr/lib/

8. Catch 22 with NIC-irq???

9. /usr/X386/lib/X11 <-> /usr/lib/X11

10. Port Make Error: /usr/libexec/ld-elf.so.1: /usr/lib/libkvm.so.2: Undefined symbol

11. /usr/lib/gcc-lib/i686-pc-linux-gnu/2.95.2/include/asm causing errors...

12. (Review ID: 164268) HotSpot Virtual Machine Error, Internal Error; Error ID: 4F533F4C494E55580E43505

13. What daemon did they substitute for /usr/lib/lpd ?