Slip installation on Solaris 2.3

Slip installation on Solaris 2.3

Post by Md. Rezaul H » Sun, 20 Mar 1994 05:34:57



I'm using SunOS 5.03.  I need to know how to install slip.  Please help or
point me in the right direction.
 
 
 

1. SLIP for Solaris 2.3: slip-solaris-3

I have been trying to use Bruce Orchard's slip-solaris-3 to make slip
connections from my Solaris 2.3 system.  So far I have been
unsuccessful, and wonder if anyone can help.

I tip into my slip server, which delivers the appropriate Internet
addresses (in dotted form).  Then I run slip-attach with these
addresses, and this completes fine.  But pinging the server then
fails, as does everything else.  The modem lights indicate that I am
sending out packets to the server, but I am not getting anything back.
Any pointers?

Two notes:
1) In a recent article by Jason Davis on PPP (Id no longer available),
he writes that for PPP it is necessary to tell the network how to
route packets back to the remote client using arp.  Perhaps the same
problem arises with SLIP?  If so, what kind of object is required for
the first argument in:
        arp -s ???? "Ethernet address of client" -pub
It doesn't accept the dotted Internet addresses delivered by the
server, but what else could there be?  Perhaps this is a blind alley.

2) In the slip dox, it states that the modem must not follow DTR
(AT&D0).  If your modem is set to do this, then the tip process grabs
the CPU and drives the load through the roof.  Killing tip returns
normality, but closes the modem connection.  I mention this, since I
wrestled with this for the longest time, and figure that there is
little reason for anyone else to.

Any help greatly appreciated -- Dave
--
Yeats on USEnet:
        Things fall apart; the centre cannot hold;
        Mere anarchy is loosed upon the world,
        The blood-dimmed tide is loosed and everywhere
        the ceremony of innocence is drowned;
        The best lack all conviction, while the worst
        are full of passionate intensity.

2. kupdated high load with heavy disk I/O

3. HELP: Solaris 2.3 <---> Solaris 2.3 PPP link problems

4. How to change resolution of the screen....

5. HELP: Solaris 2.3 <---> Solaris 2.3 PPP link Problems

6. Apache Config

7. SLIP for Solaris 2.3 or 2.4

8. Goal: Most Killer, Least Cost, Linux Server

9. SLIP for Solaris 2.3 - HOW? WHERE?

10. Slip for Solaris 2.3

11. SLIP for solaris 2.2 or 2.3?

12. Q: SLIP for solaris 2.3

13. Where to get SLIP for Solaris 2.3