Very Computer

1. ipconfig - multiple IPs - swapping IP effect on alias IPs?

Hello,

my IP structure looks like this:
# ifconfig -a
 lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
         inet 127.0.0.1 netmask ff000000
 hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
         inet 194.163.186.149 netmask fffffff0 broadcast 194.163.186.159
         ether 0:80:17:28:ae:8f
 hme0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
         inet 194.163.186.158 netmask fffffff0 broadcast 194.163.186.255
 hme0:5: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
         inet 192.168.183.156 netmask ffffff00 broadcast 192.168.183.255

I enable and disable the various alias IPs using plumb and unplumb.
/usr/sbin/ifconfig hme0:1 plumb
/usr/sbin/ifconfig hme0:1 194.163.186.156 broadcast 194.163.186.255 netmask
 255.255.255.240 up

Can I also do a plumb and unplumb with hme:0, the hardware IP of the machine?
I unfortunately do not have a test-machine here. Would hme0:2 and hme0:5
get changed or stay as they are without being influenced?

Thanks,
    Armin

2. ftp on 2.5 slow ?

3. RH 6.0: Stumped by network: works on L4 IPs, but not L3 IPs

4. ALATA Nominations for 2003

5. MASQing 2 global ips to 2 private ips how?

6. Installation problem

7. building 2.8 on a 3000 and using the OS build a 4000

8. eterm exited on signal 11

9. ultra 3000 and 4000

10. Problems with Quantum DLT 4000 + HP C5173-4000

11. DEC 3000 model 3000, ESA0 versus EWA0/ MOP versus BOOTP

12. Unix on an older DEC 3000/600 or DEC 3000/300

13. ipchains firewall, problems with looking up IPs