MRTG installation problem (SNMP Error) Help

MRTG installation problem (SNMP Error) Help

Post by Chri » Thu, 28 Oct 1999 04:00:00



Dear All,

I got a copy of MRTG 2.8.8 at
http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html and try to install
it to my Solaris 7 x86. but when i create the mrtg.cfg by using


it return te following messages:

SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 36634948
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber

SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 517944879
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
                  community: "public"
                 request ID: 517944880
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
#

I have the Solstice Enterprise Agents 1.03 installed on the server. Someone
told me that it provide the SNMP for MRTG. I'm using the Cisco 2610 router.
Can anyone help me to install the MRTG? 1,000,000 Thanks

Regards,

Chris

 
 
 

MRTG installation problem (SNMP Error) Help

Post by Holger Marz » Thu, 28 Oct 1999 04:00:00




> it return te following messages:

> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "203.85.21.126" [203.85.21.126].161
>                   community: "public"

203.85.21.126 is the machine you want to get data from, I think the
Cisco. Either there is no smtp active or you (or the Cisco admin) didn't
enable 'read' for community 'public' there.

A nice tool is snmpwalk from the ucd-snmp-4.0.1 package. I use it to
test remote machines via snmp.

 
 
 

1. Error :MRTG + SNMP

NET-SNMP version:  5.0.6

./mrtg /home/www/mrtg/mrtg.cfg

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 2 (OID: 1.3.6.1.2.1.2.2.1.16.1)
SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
                  community: "public"
                 request ID: 2083050321
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 487
SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName on

 at ./mrtg line 1835
ERROR: Target[eth0][_IN_] ' $target->[0]{$mode} ' did not eval into
defined data
ERROR: Target[eth0][_OUT_] ' $target->[0]{$mode} ' did not eval into
defined data

Fichero .cfg :

EnableIPv6: no
WorkDir:/home/www/mrtg
Options[_]: bits,growright

### INTERFICIE DE RED ###

MaxBytes[Eth0]: 1000000000
Title[Eth0]: mec-router.rediris.es (mec-router.mec.es): Ethernet0
PageTop[Eth0]: <H1>Trfico de Red<BR>
<TABLE>
.....

--
--------------------------
 FreE wOrlD = FrEe cOdE
 By NeCrOS.
 -------------------------
 ---------------------
 ------------------
 ---------------
 ------------
 --------
 -----
 --

2. Probe legacy IDE chipsets in ide_init() instead of in ide_setup()

3. ?: mrtg help w/cisco 675 (SNMP)

4. New World/Old World...?

5. mrtg/snmp problem

6. Unix better than NT -- The answer

7. SNMP on 2.2.2-Release for Network Traffic with MRTG.

8. Solaris and Loading Samba

9. MRTG SNMP MIB Temperature

10. Linux 2.2.1 : bogus high traffic with snmp/mrtg

11. Net snmp + mrtg

12. mrtg/ucd-snmp and Linux

13. ucd-snmp & mrtg