Board index Solaris

DHCP vendor class identifier containing blanks

DHCP vendor class identifier containing blanks

Post by Gregg TeHennep » Wed, 18 Oct 2000 04:00:00




>  Hi folks,
>  Can anyone tell me if it is possible to configure the
>  Solaris 6 dhcptab so that the dhcpd will match vendor
>  class identifiers containing blanks ?

>  I've tried quoting the string, escaping the blanks with
>  backslashes and various other things.

>  All the examples I've seen show '.' characters where
>  you might expect a blank (eg. SUNW.PCNFS.5.1.1 from the
>  dhcptab man page).

We're having the same problem, SunSolve shows BugID 4118738 from 3/13/98
describing this with no resolution or workaround.

- Gregg

--
Gregg TeHennepe  | Manager, IT Core Services | The Jackson Laboratory

 
 
 
Top

1. DHCP vendor class identifier containing blanks

Hi folks,
Can anyone tell me if it is possible to configure the Solaris 6 dhcptab
so that the dhcpd will match vendor class identifiers containing blanks
?  

I've tried quoting the string, escaping the blanks with backslashes and
various other things.

All the examples I've seen show '.' characters where you might expect a
blank (eg. SUNW.PCNFS.5.1.1 from the dhcptab man page).

Thanks in advance.
--
Al Parker, P.Eng, 506-631-3029
Solution Engineer, ImagicTV Inc
http://www.imagictv.com

  aparker.vcf
< 1K Download

2. SUMMARY: Support for 3Com PCI netcard?

3. DHCP User Class/Vendor Class Identifier Options

4. Frustrated setting up Ethernet network

5. Insert a client class identifier into DHCP offer?

6. Linux on an XT? 286?

7. crypted file system 2.4 ?

8. IPFW, DHCP, NATD and the 'me' identifier

9. pump & dhcp client identifier

10. DHCP client-identifier rfc2132 and ISC implementation

11. Using dhcp-client-identifier to get fixed IP address


All times are UTC
Board index