by Frank Muelle » Sat, 14 Feb 1998 04:00:00
Hi,
I run the above configuration and it works almost fine. I've created a
model script as descipt in HPs Electronic Support Center. But I've still
some troubles:
1. lp appends no form feed to my printing.
2. I've still PJL commands in my printings.
Has anybody experiences with similar problems?
Thx Mue
--
__ __
/ /_/ / Frank Mueller Nordwest-Zeitung Oldenburg
/ ____/ Telefon (0441) 9988-7270 IV / Organisation
1. Sol 2.3 & HP Jetadmin (HP JetDirect)
I have installed HP JetAdmin software on a sparc running Solaris 2.3 w/NIS+.
The installation reports
sed: garbled: /^jobs/s/yes/no/
or something quite close to that. Otherwise the installation goes with no
problems.
I can control the HP LaserJet4Si printers with the jetadmin utility. I also
can define queues with jetadmin.
However, no prints come out on the printer.
The 'lp' command reports queue and job numer when used, but the queue is
empty. The printer receives no output from the server (I have watched it from
across the room...). I seems there is no connection between the spooling
system and the jetadmin software(?)...
Any and all help will be appreciated!
-- tore
2. Tuning SUN OS IO buffer Sizes
3. Q: HP Printer Utilities for HP Jetdirect and TCP/IP?
4. Use of RPCs in threads under 2.4 - Reference Needed.
5. Problem printing with HP Color LaserJet 5/5N/5M using Solaris 7 and HP JetAdmin
7. HP Jetdirect from Solaris 2.3 - Broken HP Product???
8. squid???
9. HP DeskJet/HP JetDirect/SuSE53 printing question...
10. Banner pages on HP LasesrJets (using HP's JetDirect software)
11. HP JetDirect On HP DesignJet 750C
12. HP JetDirect/HP LaserJet 5M
13. HP JetDirect (HP LaserJet III) and Linux