Very Computer

>  Can anyone tell me the cmmand to test the pci harddisk
> controller of ultra Sparc 10 under OBP environment?

> Also, how to connect two ide harrddisks(seagate 4.3G) in this machine?
> As I try to connect them in master-slave configuration at 1st PCI
> cable, or in two-master at 1st PCI and 2nd PCI cable, it still cannot
> read harddisk using "format command" and only able to mount partition 0
> of second harddisk. As a result, I cannot use command "dd if=c0t0d0s2
> of=c0t2d0s2" to duplicate harddisk.

>  Can anyone give me adivce? Thank you!

> Regards,

> have you tried probe-pci ??? similiar to probe-scsi

> Brian

> > Hi all,

> >  Can anyone tell me the cmmand to test the pci harddisk
> > controller of ultra Sparc 10 under OBP environment?

> > Also, how to connect two ide harrddisks(seagate 4.3G) in this machine?
> > As I try to connect them in master-slave configuration at 1st PCI
> > cable, or in two-master at 1st PCI and 2nd PCI cable, it still cannot
> > read harddisk using "format command" and only able to mount partition 0
> > of second harddisk. As a result, I cannot use command "dd if=c0t0d0s2
> > of=c0t2d0s2" to duplicate harddisk.

> >  Can anyone give me adivce? Thank you!

> > Regards,