pcnfspro printing?

pcnfspro printing?

Post by Cosmos Nicola » Sat, 23 Sep 1995 04:00:00



Hi,

When printing from PCNFS Pro to a BSD lpd system I can't
seem to persuade the PC from sending the banner page
commands. Does anyone know how to disable this?

        Cheers, Cos.

Cosmos Nicolaou


                                               Old Music School,
                                               Downing Place,
tel:    +44 1223 566 300                       Cambridge,
mobile: +44  850 216 152                       United Kingdom CB2 3EL
fax:    +44 1223 566 301

---

 
 
 

1. PCNFSpro under Win95 - Can't print to network printers

Let's try this again.  I posted to sun-managers but got nothing back.

I am running a Sparc20 server with PC's using both Windows 3.1 and
more recently, Windows 95.  Although I had no problem installing
PCNFSpro (1.1.1.0) under 95, I can't print to network printers anymore
(i.e., printers spooled from the server, not the Windows Network).
Here is the message I get when sending a print job:

--
There was an error writing to LPT2: for printer (HP LaserJet4V/4MV
Postscript):
There was a problem printing to the port.
Check to make sure your printer is configured to use a valid port.
This printer will be set to work offline.
To save your print job in the local printer queue, click OK.
--

I have looked in the sun-managers archives as well, but can't find
anything related.  And I have had the problem with every 95 box I have
installed.

What gives?!?

Thanks for any help!

Greg

--
Greg Heim
Network Administrator
International Safety Instruments
Lawrenceville, GA

2. X Windows xfconfig problem

3. printing postscript with pcnfspro

4. Ctrl C catcher

5. PCNFSpro 2.0

6. remote commands via ftp

7. Problem: Infx NewEra connection with PCNFSpro

8. crontab hlep

9. Configuration Problem with Sun's Pcnfspro (CUH?)

10. PCNfsPro and Win 95

11. PCNFSpro Drive Not Ready

12. PCNFSpro & MS Word

13. Solaris x86 and PCNFSPro