Very Computer

1. dp-4.0 on Solaris 2.4

Hi,

        I'm having some trouble with dp-4.0 on Solaris 2.4
THis is on a SPARC 5 and was compiled with gcc.  When it tries to call
the service provider, it first prints out a message like:

12/20 10:03:33  9347    failcall: dp0 (PSI): No modem -- check lock files

and then _USUALLY_ dials anyway.  The chat script runs okay, and then
things stop.  snoop shows me sending 'ping' packets to the address on
the other side of the link, but shows no packets being received.

        Additionally, /var/adm/dp/call.log shows :

PSI term/a 12/20/95 09:59:36 00:00:30 dpd   ip/icmp   I 8/157        O 12/505

        ... as if packets may have been exchanged.  Also, dp.log shows:

12/20 09:59:36  9268    makecall: PPP started to "PSI"
12/20 09:59:36  9268    makecall: "dp0" IF flags changed from 0x0000 to 0x00f1
12/20 10:00:06  9268    collect_child: PPP exited with status 0
12/20 10:00:06  9268    hangup: Process 9268 got signal 18 for "dp0"
12/20 10:00:06  9268    hangup: Outbound interface "dp0" up 30 seconds
12/20 10:00:06  9268    hangup: Inpackets = 8, Outpackets = 12, Average = 0.67 packets/sec
12/20 10:00:06  9268    hangup: Disconnected "dp0"

        Anyone have any ideas on this?

Thanks a bunch,

2. not so good vga in dosemu?

3. Help: Installing DOS box using Solaris 2.4, thin coax cabling

4. SLS 1.05 Manpages and adduser problem

5. Using the "upgrade" option installing Solaris 2.4

6. 8-mm 5G tape drives

7. Installing a diskless client using admintool - SOlaris 2.4

8. Newbie needs: Help finding C++ conio.h substitute

9. Anyone used Sun ShowMe video package using Solaris 2.4?

10. Compiling Mosanim/Mosaic dynamically for Solaris 2.4 - HOWTO

11. Howto change display resolution with solaris 2.4

12. ?HOWTO? SLIP/PPP on Solaris 2.4

13. install solaris 2.4 and packages from more than one install-directory