Need help on new disk (Seagate ST51080N) to Solaris 2.4. Thanks.

Need help on new disk (Seagate ST51080N) to Solaris 2.4. Thanks.

Post by ypw.. » Fri, 19 Jul 1996 04:00:00



Hi :  

       Need SUN/unix guru's suggestion and help.

       Just try to add a 1G drive (Seagate's Medalist 1080sl, aka ST51080N)
to a Solaris 2.4 system.  Before I attach to the back of the SCSI port, I
noticed that the SCSI port is not terminated.  After I attached the drive
to the SCSI port and try to restart, I got the following messages (messages
after ======).  Is this due to SCSI termination ?  I opened the case and
could not find any SCSI terminator resistor pack or terminator.  Could any
one help me ???  Thanks a lot.

       Also, when I use SCSI-probe command, I got :

               SCSI unexpected phase = 0
               Target 4
               Stack  underflow

                                                        Y. Wang

 ==========================================================================


     SCSI bus message OUT phase parity error
     fifocount=0


     input message botch: current esp state:

 esp: State=MSG_IN_DONE  last state=MSG_IN
 esp: Latched state=0x97<IPND,XZERO,MSG,CD,IO> intr=0x40<ILL> fifo 0x20
 esp: last msg out NO-OP; last msg in: REJECT
 esp: DMA csr=0xa4240010<INTEN>
 esp: addr=fc00200d dmacnt=0 last=fc002008 last_cnt=5
 esp: Cmd dump for Target 4 Lun0:
 esp: cdblen=6, cdb=[0x12 0x0 0x0 0x0 0x30 0x0]
 esp: pkt_state=0x3<SEL, ARB> pkt_flags=0x6 pkt_statistics=0x4
 esp: Cmd_flags=0x1422 Cmd_timeout=60


     input message botch


     SCSI bus message OUT phase parity error


     Cmd dma error

 ==========================================================================

                                                        Y. Wang

 
 
 

1. Need help on making perl 5.002 on solaris 2.4 Thanks !!!

Hi :  

       Need Perl/Soalaris guru's suggestion and help.

       Just try to make Perl5.002 on a Sparcstation 5 running Solaris 2.4
but failed.  It failed and get the message about could not find certain
file :

        ----------------------------------------------------------
        (You get this message, because MakeMaker could not find
                 "/opt/perl/lib/sun4-solaris/5.002/CORE/perl.h")
        ..........................................................

Then I copy this file to that directory and get another message of :

        ----------------------------------------------------------
        Warning: PERL_LIB (/opt/perl/lib) seems not to be a perl
                    library directory
        (Exporter.pm not found) at ../../lib/ExtUtils/MM_Unix.pm line 601,
                    <DATA> chunk 811.
        Could not open 'DynaLoader.pm' (attribute VERSION_FROM):
                    No such file or directory at ../../lib/ExtUtils/MM_Unix.pm
                    line 609, <DATA> chunk 811.
        ..........................................................

I check the file MM_Unix.pm and found out it had problem with version and
previous version (which we do not have).  I wonder if :

       1. Is this error due to compiler we used (from SUN's, the path is
          /usr/ucb/cc) ?

       2. Is there any copy of perl that is ready for solaris 2.x ? where
          can I get it ?

       3. Any suggestion is welcome.  

Thanks a lot for your help.  Have a nice day.

                                                        Y. Wang

2. Disk Error After setup on Slackware

3. Partition problem with SCSI disk Seagate ST51080N

4. Sun Workstation as a bridge?

5. Need your help to change default boot disk on Solaris Thanks !!

6. Anyone bought a DEC ALPHA at HCC dagen in Holland ?

7. How to add a new disk on Netra i5 solaris 2.4

8. Automated SysAdmin; Dot Files; HP-UX porting tricks (Jul 31/1998)

9. I can't install FreeBSD on Seagate Medalist 1080sl (ST51080N) :(

10. NCR53C810 + Seagate ST51080N wired problem

11. Problems with AHA-1520 and Seagate ST51080N

12. NEED x86 SOLARIS 2.4 BOOT DISKS>>>