1. Jumpstart boot server - Clients don't boot.
Hi there everyone,
I have a boot server on one subnet and a bootserver/jumstart server on
another.
bootserver/jumstart = jumper
boot server = chiguay (setup_install_server -b used).
Software is Solaris 9 8/03.
Clients can boot/jumpstart off jumper, so all is well.
Clients are unable to boot off the bootserver chiguay.
rpc.bootparamd and xxx are running.
add_install_client -e 0:3:ba:x:x:x:x -s jumper:/export/install test32 sun4u
Same command I used on jumper.
There are entries in /tftpboot and its uncommented in inetd.conf,
/etc/bootparams and /etc/hosts are updated correctly.
total 298
2 drwxr-xr-x 2 root other 512 Jan 23 08:52 ./
2 drwxr-xr-x 24 root root 512 Jan 19 14:12 ../
2 lrwxrwxrwx 1 root other 26 Jan 23 08:52 AC110582 ->
inetboot.SUN4U.Solaris_9-1*
2 lrwxrwxrwx 1 root other 26 Jan 23 08:52 AC110582.SUN4U ->
inetboot.SUN4U.Solaris_9-1*
288 -rwxr-xr-x 1 root other 131424 Jan 23 08:52
inetboot.SUN4U.Solaris_9-1*
2 -rw-r--r-- 1 root other 316 Jan 23 08:52 rm.172.17.5.130
/etc/bootparams:
cpocsw root=chiguay:/export/install/Solaris_9/Tools/Boot
install=jumper:/export
/install boottype=:in rootopts=:rsize=32768
chiguay's arp tables have no mapping for the new host.
The host is on the network. I installed it aforehand with a test IP and
could ping both the router and the boot server. Next I ran boot -net
install:
The SunFire v210 times out waiting for an r/arp packet. The network guys
say that there is nowt wrong with the network.
Any thoughts?
Zii
3. Q: Boot/Jumpstart Solaris 8 machines from a boot server on a remote segment...
4. natd
5. Q: Booting/Jumpstarting Solaris 8 from a boot server on a remote segment.
6. Help : FILE * and iostreams
7. 11 Linux features I care about (was: 10 Linux "features" nobody cares about.)
9. GNNServer vs. Apache - feature for feature....
10. Jumpstart x86: How not to PXE after jumpstart finishes and reboots ...
11. Jumpstart 2.5.1 Client from a 2.6 Jumpstart Server
12. Jumpstart not jumpstarting a Sparcstation2