Very Computer

After installing Solaris x86 on one SCSI disk, I connected a 2nd,
DOS SCSI disk and mounted it using: mount -F pcfs /dev/dsk/c0t4d0p0 /dos
It worked fine.  Since then I have rebooted several times, and now it
will not mount!  I get the response:

pcfs: disk not in DOS format!
mount: Invalid argument

Format reports:
VAILABLE DISK SELECTIONS:
       0. c0t0d0 <DEFAULT cyl 1852 alt 2 hd 15 sec 74>

       1. c0t4d0 <MAXTOR-XT-8760S-B6B cyl 1613 alt 2 hd 15 sec 54>

       2. c1d0 <DEFAULT cyl 362 alt 2 hd 8 sec 39>

Specify disk (enter its number): 1
selecting c0t4d0
[disk formatted]
Disk not labeled.  Label it now? no

format> part
Please run fdisk first.

And fdisk /dev/rdsk/c0t4d0p0 reports:

             Total disk size is 1615 cylinders
             Cylinder size is 810 (512 byte) blocks
                                           Cylinders
      Partition   Status    Type      Start   End   Length    %
      =========   ======    ========  =====   ===   ======   ===
          1                 DOS-BIG       0  1615    1616    100

This is strange!

Any help will be appreciated.

hh
--

Harry Haas  GTRI/SEAL/RSD/ASB  | Georgia Tech Research Institute
Research Engineer II           | Sensors & Electromagnetic Applications Lab

Lean towards the light . . .   | Atlanta, Georgia  30332

Quote:>After installing Solaris x86 on one SCSI disk, I connected a 2nd,
>DOS SCSI disk and mounted it using: mount -F pcfs /dev/dsk/c0t4d0p0 /dos

It should be /dev/dsk/c0t4d0p0:c

--

"Supporting Windows is like buying a puppy.  The dog only cost $100, but
we spent another $500 cleaning the carpet."
 - Marc Dodge, "Reality Check", _Open Computing_, December 1994

I'd like to add a line to /etc/vfstab so that my c: drive is mounted at
boot time.  Unfortunately, my first stab at this was a failure.  Any
hints on that, anyone?