Solaris 2.3 101317-12 patch

Solaris 2.3 101317-12 patch

Post by Masood b Sa » Wed, 04 Oct 1995 04:00:00



Attention all users of Solaris 2.3 Patch 101317-12.

I encountered the problem of misprinting after installing Solaris 2.3
Patch 101317-12.  It seems that the patch does not work well on a
Sun SparcServer 4/490 running Solaris 2.3 installed with an ALM-2
interface.  Printers attached to the ALM-2 port with exhibit problems
such as pages not being printed and on all occasions the last page of
the document will not be printed.  The printer I used was a Apple
Laserwriter Select 360 at 9600 baud, 8 data bits, 1 stop bits, no parity
an software flow control.

If you have the same problem,  you may like to revert back to
a patch before 101317-12.

Happy printing.

Masood b Said

 
 
 

1. problem: 101317-12/11 and jumpstart

Does anyone out there use jumpstart and load patches
automatically? And if so have you tried to install
101317-11 or -12. Niether patch will install during
jumpstart. 101317-09 works, no problem. They lockup
and I look at the processe running and it is
a command (I really don't remember which one right
now) that is being caugt by signal 14 sigalrm. Has
anyone else run into this problem or are using those
patches OK?

------------------------------------ |\      _,,,--,,_  ,) ----------
Andrew Dutton                        /,`.-'`'   -,  ;-;;'

---------------------------------- '---''(_/--' (_/-' --------------

2. IRQ's assingment

3. Problem with patch 101317-09.

4. AIX 4.3.2 problem with network

5. newbie attempting file sharing with serial cable

6. Printtool crash, even with patch 101317-02

7. egreping an array

8. Workaround for priocntl exploit vs patch 112233-12 for Solaris 9

9. Any problems with Solaris 8 kernel patch 108528-12?

10. Solaris 2.4 x86 101946-12 patch install failure (error 10)

11. Solaris x86 12/02 patching questions

12. Printer filter for PLP version 3.4.12 on Solaris 2.3