Had a problems with a newly set up Solaris 9 server when simiiltainous
dial-ins were swapping files.
Set-up appears OK,
Anyone had this happen?
JohnO
Had a problems with a newly set up Solaris 9 server when simiiltainous
dial-ins were swapping files.
Set-up appears OK,
Anyone had this happen?
JohnO
>Had a problems with a newly set up Solaris 9 server when simiiltainous
>dial-ins were swapping files.
>Set-up appears OK,
>Anyone had this happen?
1) How are the dial-in modems connected to the server? Two modems,
each connected to a serial port? Connected to a terminal server
with a network connection to the server? (if its a terminal server,
what kind of network connection does it make to the server? telnet?
rlogin?)
2) Is a network protocol being used over the modems? PPP? SLIP?
Or just a plain terminal session?
3) What does "swapping files" mean? Are the dial-in users
transferring files directly to each other, or are they uploading
to the server and then downloading from the server? What file
transfer protocol are they using? FTP? SCP? Zmodem? Xmodem?
-Greg
--
Do NOT reply via e-mail.
Reply in the newsgroup.
Will ned to check, but to the best of my knowledge:
8 modems are connected via a serial card.
When 2 users log-in at same time and download, files are croossed.
Using terminal session and ymodem
>>Had a problems with a newly set up Solaris 9 server when simiiltainous
>>dial-ins were swapping files.
>>Set-up appears OK,
>>Anyone had this happen?
>You need to be more specific about the dial-ins and the swapping.
>1) How are the dial-in modems connected to the server? Two modems,
>each connected to a serial port? Connected to a terminal server
>with a network connection to the server? (if its a terminal server,
>what kind of network connection does it make to the server? telnet?
>rlogin?)
>2) Is a network protocol being used over the modems? PPP? SLIP?
>Or just a plain terminal session?
>3) What does "swapping files" mean? Are the dial-in users
>transferring files directly to each other, or are they uploading
>to the server and then downloading from the server? What file
>transfer protocol are they using? FTP? SCP? Zmodem? Xmodem?
> -Greg
1. Connection problem via cross-over cable
I have myself in a predicament.
I have an Ultra 60 with Solaris 9 that has been up and happy for many
months. I physically attached a SCSI external tape drive, bounced it,
and now I can not connect to it. I do not have access to it via its
framebuffer. So I am trying to hook up using a Win box and cross-over
cat-5 cable.
I know the ip address it thinks it was before I restarted the machine.
I used to be able to ssh or telnet to it. Let's call the ip address:
65.112.8.23
After setting my Win box to 65.112.8.24 and linking the cross-over
cable, I can successfully ping the Sun box at the address above. But if
I try to telnet or ssh to 65.112.8.23, I get:
"Connecting To 65.112.8.23...Could not open connection to the host, on
port 22: Connect failed."
I have tried various ports, and no love....same error message, but with
a different port number at the end. What else could I try in order to
get a shell into this box and fix the network configuration?
Thanks,
Rob
3. Partition Cross-Over Project: Extended to Primary
4. USB Modem
5. Cross-over connection between hosts
8. xdm error: unknown session exit code 2816
10. ping troubles with simple cross-over network
11. Setup FTP server for multi-users and no cross-over access?
13. Cross-over cable between NT and Linux