CDROM opens after an INIT 6

CDROM opens after an INIT 6

Post by Peter Wilso » Wed, 04 Apr 2001 22:38:29



Hi

Anyone an idea, the CDROM of a Ultra Sparc 5 with Solaris 7 opens after I
perform an INIT 6. I did already with Solaris 2.6 and I thought this is
connected to some modifications I did.

Ideas are appreciated ! TIA

Peter Wilson

 
 
 

1. Informix problems afters Y2K Solaris 2.5 patch

Since I did the Y2K patch for Solaris 2.5 on a Ultra Sparc 1 system,
Informix 7.22 refuses to startup properly.
Anyone experienced a simular problem? Any suggestions?
Attached some system information and the relevant part of the online.log

Has van der Krieken.

# uname -a
SunOS sungemms 5.5 Generic_103093-25 sun4u sparc SUNW,Ultra-1
# su - informix
Sun Microsystems Inc.   SunOS 5.5       Generic November 1995
$ onstat -V
INFORMIX-OnLine Version 7.22.UC2   Software Serial Number AAA#J917741
$ cat online.log

Mon Dec 27 16:09:48 1999

16:09:48  Event alarms enabled.  ALARMPROG = '/informix/etc/no_log.sh'
16:09:48  DR: DRAUTO is 0 (Off)
16:09:49  INFORMIX-OnLine Initialized -- Shared Memory Initialized.
16:09:49  Physical Recovery Started.
16:09:49  Physical Recovery Complete: 0 Pages Restored.
16:09:49  Logical Recovery Started.
16:09:49  shmget: [ENOMEM][12]: key 52574804: out of shared memory, check
system
 SHMALL
16:09:49  out of virtual shared memory

16:09:49  Assert Failed: Internal Error - Segmentation Violation

                Thread(13, bld_logrecs, d039530, 1)
16:09:49   Results: OnLine must abort
16:09:49   Action: Reinitialize shared memory
16:09:49   See Also: /var/tmp/af.d813d
16:09:49  rsinit.c, line 9932, thread 13, proc id 20737, Segmentation
Violation.
16:09:49    PANIC: Attempting to bring system down

2. Installing a POP server on FreeBSD

3. callback, ppp, and morning-afters

4. Problems with AST_FOURPORT under 1.13

5. mcopy gives init: open: Permission denied?

6. APC Back Ups 400 for pentium machine?

7. Unable to open init. console

8. Boot Record Extended Partition

9. Mtools: init:can't open.....

10. Mtools: init: open: Permission denied

11. Panic:exit-cannot exec /etc/init(PID1) Error on Open Server 5.0.4

12. init: open(/dev/console): Input/output error

13. Init cannot open display?