Ultra-10 / SUN Pengiun / Solaris 10

Ultra-10 / SUN Pengiun / Solaris 10

Post by Doug Luur » Thu, 18 Aug 2005 23:50:58

Can this unit run the Pengiun with Solaris 10.

I have the 1.2a software, but have not been able to get it running.

System reports on installation (via the pkgadd) that it can not
location the PCI card.



1. Jumpstart solaris 10 b69 and solaris 10 b72 on an Ultra 30

I am trying to jumpstart a Sun Ultra 30 using Solaris 10 b69
(b72 gives the same results) from a Linux jumpstart server.

I have scripts for all this (soon to be release opensource!) but
..although I can get b55, beta5(b60) and b63  and b55 to work
b63 and b72 do not work!

since this is an Ultra 30 I went to

and ran Patch 105930-06 with no problems.

Even now it does not boot.

- bpgetfile shows all parameters can be retreived ok.
- nfs mounts all work
- pfinstall shows the profile is ok
- I've checked the rules file and it is fine.
- The /tftpboot directory is setup correctly with the right inetboot file.

boot net - install
I can see the tftp transfer clock up ok to 38600
The linux server shows the correct mount of the root= directory.

Normally the kernel banner should appear next but instead I get
loads of messages

not found: vmem_create
not found: vmem_alloc
not found: cv_signal
not found: wake_sched_sec
not found: physmax
not found: putreg
not found: fp_precise
not found: ddi_prop_lookup_init_array
not found: sema_v
not found: traceregs
not found: psignal
not found: strcmp
not found: fop_putpage
not found: strcmp
not found: global_zone
not found: fastscan

etc.. and eventually

krtld:error during initial load/link phase
panic - boot:exitto64 returned from client program

and I'm back at the ok prompt

1. From the book "Solaris Internals: Core Kernel Architecture" using

/usr/ccs/bin/dump -Lv /platform/sun4u/kernel/sparcv9/unix

mentions the line NEEDED..dtracestubs

but I cannot find dtracestubs under that /platform directory.
Is this a problem?

2. nm on things seems to indicate the missing symbols are in genunix
but I'm not sure how to debug what is going on??

3. eeprom | grep boot-file give
boot-file: data not available so I assume a 64-bit boot should occur.

On the net I've seen add set moddebug to /etc/system but the
Solaris Internals boot indicates that /etc/system is read AFTER
krtld does an inital link.

I'm totally stumped why this will not work...Any ideas?

2. maximum size of data in C & DEC-UNIX

3. CD Writer problems Plextor24/10/40A on a SUN ultra 10

4. I'm not sure what these ppp errors are...

5. Sleepy Ultra 10/Solaris 10 box

6. apache & netscape faq addition?

7. ultra 10 / solaris 10, keyboard not responding during installation

8. Operating outside of the box: using rp3 without GNome or KDE...

9. Installing Solaris 10 on Ultra 10

10. Ultra 10 running Solaris 10 panics -- hardware or kernel issue?

11. Installing Solaris 10 on Ultra 10

12. Solaris 10 EA on Ultra 10

13. solaris 10 performance on an ultra 10