DSL/eth0 Woes - eth0: transmit timed out, tx_status 00 status 6000.

DSL/eth0 Woes - eth0: transmit timed out, tx_status 00 status 6000.

Post by Ryan Robinso » Thu, 02 Jul 1998 04:00:00



I've been trying to set up ADSL here and I've been having some...
problems.
I'm using a 3Com 3C905B-TX (PCI) card, and I compiled a module
which SEEMS to be working fine...  Here's the output...

3c59x.c:v0.99E 5/12/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
loading device 'eth0'...
eth0: 3Com 3c905B Cyclone 100baseTx at 0xe400, 00:10:4b:c8:80:ca, IRQ 9
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation
interface.
  Enabling bus-master transmits and whole-frame receives.

Windoze reports IRQ 10 (or was it 11...), but I don't have any way of
changing it--the dos config program won't recognize it. :~(

When I run ifconfig, it says "SIOCSIFFLAGS: Try again"... *shrug*

And I get these messages periodically...

eth0: transmit timed out, tx_status 00 status 6000.
  Flags; bus-master 1, full 0; dirty 0 current 0.
  Transmit list 00000000 vs. 03a53310.
















eth0: Resetting the Tx ring pointer.

Well, I assume SOMEBODY has got this card working in linux :P  Any
advice would be GREATLY appreciated.

--
To mail me, remove all a's from the above address.

 
 
 

1. eth0: transmit timed out, tx_status 00 status e000

Hello all,
I need help with a redhat 5.1 networking problem.
I am using a PCI 3com 3c900.  Linux seems to pick up the card and all the
setting are correct, however, I am still receiving this error message:
"eth0: transmit timed out, tx_status 00 status e000"
Does anyone know how to fix this problem, or at least point me in some
direction.
Thanks,

2. Help! Problem with a modem

3. I/O address changes on SMC card

4. kernel: eth0: transmit timed out, Tx_status 00 status 200

5. Linux as NT RAS

6. eth0: transmit timed out, tx_status 00 status e000

7. Ethernet lost in pl14[a-i]?

8. ???"eth0:transmit timed out, Tx_status 00 Status 2000 Tx FIFO room 1536" ???

9. ???eth0: transmit timed out, Tx_status 00 Status 2000 Tx FIFO room 1536???

10. 3c900:eth0:transmit timed out, tx_status 00, status e000

11. eth0: transmit timed out, Tx_status 00 status 2019 Tx FIFO