Very Computer

I have an IBM Thinkpad 770X running SuSE Linux 6.0 everything works
only the Ethernet-Card is not working.

It is an IBM EtherJet 10/100 CardBus.

When cardmgr is running and i insert the card, the system hangs
and after removing the card everything works fine again
then in the /var/log/messages i have hundreds of similar lines like:

Mar 30 16:48:37 mars kernel:   image 206035: 0x000000-0xffffffff,
signature PCIR
Mar 30 16:48:37 mars kernel:   image 206035: 0x000000-0xffffffff,
signature PCIR
Mar 30 16:48:37 mars kernel:   image 206035: 0x000000-0xffffffff,
signature PCIR
Mar 30 16:48:37 mars kernel:   image 206035: 0x000000-0xffffffff,
signature PCIR
Mar 30 16:48:37 mars kernel:   image 206035: 0x000000-0xffffffff,
signature PCIR
...

I have no problems inserting a Adaptec SlimSCSI 1460C. Now i am not
shure
wat is causing the problem, because a normal pcmcia-card is recognised
correctly.

Thanks

zlatko

It isn't a supported card, so you should have no reason to expect it
to work.

-- Dave Hinds

    [cs89x0_cs driver]
        IBM EtherJet

but i think the problem is in the cardbus support

Can anyone help

Thanks

zlatko

: There exists a driver for it if you look at the end of
: the file 'SUPPORTED.CARDS':
:
:     [cs89x0_cs driver]
:         IBM EtherJet

:
: but i think the problem is in the cardbus support

This driver is for a 16-bit card that is not related to the 10/100
CardBus EtherJet card.

-- Dave Hinds