I have problems with Davicom 9102 Ethernet Driver in kernel 2.4.7pre6

I have problems with Davicom 9102 Ethernet Driver in kernel 2.4.7pre6

Post by Wilderman Niels Ceren Pre » Sat, 14 Jul 2001 21:37:28



Yesterday i compiled the source code of the kernel 2.4.6 with patch
2.4.7pre6 and when load all it's fun. I have two interfaces eth0,
eth1. eth0 is a netcard Digital (compatible with Tulip) and the other
ethernet is a Davicom 9102 (eth1 with module dmfe), but have a bug or
error in sometime:

"eth1: out-of-sync dirty pointer 159147 vs ?????"

Help Me !!.

Wilderman Ceren
Cartagena - Colombia

 
 
 

1. Installing Davicom 9102 onboard ethernet card driver

Hi, everyone,  

I am trying to install the driver for the DAVICOM 9102 onboard ethernet
interface on M598LMR motherboard.  I am running RedHat Linux 7.0 with kernel
version 2.2.16-21.  The source of the driver comes with the motherboard.  I
followed instructions for compiling and inserting the driver module given with
the manual that came with the motherboard.  I had to add an include parameter
to get the compilation to run.  The compilation gave the following results:


-I/usr/src/linux/net-I/usr/src/linux/include -Wall -Wstrict -prototypes
-odmfe.o -c dmfe.c

/tmp/ccbwfzep.s:Assembler messages:
/tmp/ccbwfzep.s:9:Warning:Ignoring changed section attributes for .modinfo

Then, I try to insert the module; but it gave me the folloing message:


dmfe.o:unresolve symbol inb
dmfe.o: unresolve symbol inl
dmfe.o: unresolve symbol inw
dmfe.o: unresolve symbol virt_to_phys
dmfe.o: unresolve symbol skb_put
dmfe.o: unresolve symbol __memcpy
dmfe.o: unresolve symbol init_timer
dmfe.o: unresolve symbol mark_bh
dmfe.o: unresolve symbol kfree_skb
dmfe.o: unresolve symbol __constant_c_and_count_memset
dmfe.o: unresolve symbol outl
dmfe.o: unresolve symbol outw

Can anyone tell me what I have done wrong?  I think I am missing library or
include file.  

Thanks,
Leo

2. Ultra-high resolution monitor timings?

3. Davicom 9102 Ethernet card

4. X-windows login prompt?

5. Davicom 9102 AF, Redhat 7.2, Dell 8200, kernel 2.4.7-10

6. Via C3 and VT8605 [ProSavage PM133]

7. Insert new Davicom 9102 network card driver module

8. new sound driver (and PnP code)

9. Davicom LAN 9102 and CMedia 8738 in CorelLinux

10. Davicom 9102

11. davicom 9102 and linux 2.5

12. CMedia 8738 and Davicom LAN 9102 in Mandrake Linux 6.1

13. Davicom LAN 9102 and CMedia 8738 in CorelLinux