linux - win 95 DHCP

linux - win 95 DHCP

Post by kri » Mon, 16 Jul 2001 05:54:24



Hi,

I have an internetconnection(lan) at my home and connected with my win
95 pc.
I want to set up my internetconnection with my linux pc and therefore
I took the networkcard out of my win 95 pc and put them in my linux pc
then starting and he told me that he found a networkcard(linux rh6.2),
at this point he ask me also for an ip-address or for
automatic(DHCP-BOOTP), I choose automatic and then clicking ok,then he
shows for a second the window "sending DHCP request" after that he
wont go furder and he shows me not an ip-address.

Why is he not receiving an ip from the DHCP-server (win 95 is ok).
Is it some configuration in my linux(for configuration of the request)
or is it my provider his dhcp that detected that I am asking for an IP
with another PC?? (I use the same network card as I did with my win
95).

what can I do to test a DHCP-request or finding some
logginginformation.

Can anyone help me with this

Thanks in advance
Kris

 
 
 

linux - win 95 DHCP

Post by Dean Thompso » Tue, 17 Jul 2001 10:17:06


Hi!,

Quote:> I have an internetconnection(lan) at my home and connected with my win
> 95 pc. I want to set up my internetconnection with my linux pc and
> therefore I took the networkcard out of my win 95 pc and put them in my
> linux pc then starting and he told me that he found a networkcard(linux
> rh6.2), at this point he ask me also for an ip-address or for
> automatic(DHCP-BOOTP), I choose automatic and then clicking ok,then he
> shows for a second the window "sending DHCP request" after that he
> wont go furder and he shows me not an ip-address.

Have you got a DHCP server in your network that the second network card can
get its address allocated from.  It might be better for you to provide a
static IP for your second network card so that you have a static gateway from
which the other machines in your network (win95) can actually forward their
traffic to.  It isn't always wise to have a dynamic gateway address, it just
makes the process of forwarding traffic out the gateway slightly harder thats
all.

You might like to read some of the documentation at the
http://www.linuxdoc.org web site which basically outlines how to construct a
small network at home.  I think the IPCHAINS-HOWTO document would be a good
starting point for you to find out a little more about setting up your home
network.

See ya

Dean Thompson

--
+____________________________+____________________________________________+

| Bach. Computing (Hons)     | ICQ     - 45191180                         |
| PhD Student                | Office  - <Off-Campus>                     |
| School Comp.Sci & Soft.Eng | Phone   - +61 3 9903 2787 (Gen. Office)    |
| MONASH (Caulfield Campus)  | Fax     - +61 3 9903 1077                  |
| Melbourne, Australia       |                                            |
+----------------------------+--------------------------------------------+

 
 
 

1. Linux DHCP and Win'95 DHCP Client??

Hello all,

Has anyone gotten the DHCPD from www.isc.org to work with Win'95 clients?

I see the 'DHCPOFFER .....', but the client doesn't seem to pull in the address...

Any pointers to getting this to work would be greatly appreciated.

BTW, my system has an ISDN interface (PPP) and an interface (eth0) on my class 'C'...  I had seem
some info about the above causing problems with dhcpd.

TIA,
Greg

---

Greg Foster

http://www.asyx.com

2. CONFIG_MULTIQUAD has got to go...

3. DHCP on linux and win 95 A

4. XSendEvent() Not working!! Hints on how to debug?!

5. DHCP and WIN 95

6. Trouble with Rotate

7. Linux, Win 95, and Win NT Modem

8. AIX 3.1 restore program on AIX 1.2?

9. Win 95, Win 3.1 and Linux sharing the same swap?

10. Installing Linux/Win 95/Win NT

11. Win 95, Linux and Win NT 4.0 boot

12. Win NT, Win 95, Linux & Samba questions

13. Installing Linux+Win 95+Win NT