problem with masquarading

problem with masquarading

Post by RĂ¼diger Frees » Sat, 15 Jan 2000 04:00:00



Hello,

I use a suse linux 6.2 box to share an internet connection with some
windows clients.
I have only configured ipchains -A forward -j MASQ during testphase so
all clients can use
WWW , ftp , ping ...
When trying to run games (like AOE 2...)  from the client they are not
able to start the game.
Is there somthing in TCP UDP which has to be configured separatly.
With a direct internet connection of the client (after reconfiguring)
everything works.

Any help or advice to internet pages will be helpful.

Thanks Ruediger

 
 
 

problem with masquarading

Post by Fred Smit » Sat, 15 Jan 2000 04:00:00


To setup games with ip masquarading, check out this link

http://tsmservices.com/masq/


Quote:> Hello,

> I use a suse linux 6.2 box to share an internet connection with some
> windows clients.
> I have only configured ipchains -A forward -j MASQ during testphase so
> all clients can use
> WWW , ftp , ping ...
> When trying to run games (like AOE 2...)  from the client they are not
> able to start the game.
> Is there somthing in TCP UDP which has to be configured separatly.
> With a direct internet connection of the client (after reconfiguring)
> everything works.

> Any help or advice to internet pages will be helpful.

> Thanks Ruediger


 
 
 

1. FTP, NFS problems on masquaraded debian setup

Hey, thanks for the help in advance.  Please reply cc to

Here goes.  I have a debian potato setup with masquarading to allow my
win9x box access to the net.  Problem is such.  

1) FTP doesn't work when the list command is given.  Cuteftp for example
gives connection can't be made.  Same applies for connections to the ftp
server on my box from a box outside my network, tho the box in my network
ftp's fine to the debian box.  Also, ftp connections to an outside ftp
server from the box in the masq. network also fails with the error.  

2) I have setup nfs-server on the box and have added an entry for one
directory to be shared with one ip.  the contents of /etc/export are
such...

/home   192.168.0.2(ro,noaccess)

A win9x box has the above mentioned IP.  When I search for my hostname
from the windows box, nothing shows up.  (Find computers)

I was wondering why this happens, if I haven't set it up right or
something.  The rpcinfo -p outputs the following...

   program vers proto   port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper
    100021    1   udp   1024  nlockmgr
    100021    3   udp   1024  nlockmgr
    100024    1   udp   1013  status
    100024    1   tcp   1015  status
    100003    2   udp   2049  nfs
    100003    2   tcp   2049  nfs
    100005    1   udp    922  mountd
    100005    2   udp    922  mountd
    100005    1   tcp    925  mountd
    100005    2   tcp    925  mountd

Thanks in advance for the help.  I have scavenged the howtos to no avail,
any info would be appreciated.


Thanks.
genosha

-------------------------
http://www.genotrance.com
-------------------------

2. Disk status

3. Masquarade;problem with dynamic ip

4. Linux Filter Internet Content - PLEASE HELP!!!!

5. Q: Problem with e-mail masquarading does not work on Redhat 6.0

6. Drivers for FC adapters

7. Problem with Setting up Masquarading

8. book over asynchronous i/o

9. masquarading problem with gameserver

10. IP masquarade problem

11. IP masquarading SMTP problem

12. RedHat 5.1 and IP Masquarading problems

13. rh 7.1 and ip masquarade problem