Step-by-step instructions to set up 2 computer home network?

Step-by-step instructions to set up 2 computer home network?

Post by Charlie Zende » Tue, 08 Feb 2000 04:00:00



Hi,

I read the networking HOWTO and it was vague on the actual steps to
take to setup a home network with linux. I have a Linksys 10/100 hub and
want to network two home computers together. Occasionally one of
these will be dialed in and using PPP to access the internet. I'm
looking for a book or HOWTO with detailed step by step instructions
on how to set this up. This should include how to choose network
and host names and addresses. Any suggestions?

Thanks,
Charlie
--

Earth System Science, University of California, Irvine CA 92697-3100

 
 
 

Step-by-step instructions to set up 2 computer home network?

Post by Kevin Mart » Wed, 09 Feb 2000 04:00:00



Quote:>I read the networking HOWTO and it was vague on the actual steps to
>take to setup a home network with linux. I have a Linksys 10/100 hub and
>want to network two home computers together. Occasionally one of
>these will be dialed in and using PPP to access the internet. I'm
>looking for a book or HOWTO with detailed step by step instructions
>on how to set this up. [...] Any suggestions?

A book would be overkill... take a look at http://brasscannon.com/Linux/
and let me know what you think it's missing.  Deal? :-)  It gives the
valid ranges for local-only addresses, among other things.

As for naming -- please, let's not restart that "What to name a machine"
thread-from-hell here!  All you need to know is "don't make up a domain name
in the real namespace (.com, .org, .net, and so forth) unless you're willing
to register it."  Call your site "zender.foo", not "zender.com".  If you're
dialing in to wombat.com, you should be able to call your machine
zender.wombat.com without stepping on anyone's toes.

 
 
 

1. I need some step-by-step instructions on mounting a FAT partition

I'm brand new to linux, so I apologize for myself in advance. I just
installed Red Hat 6.2 onto my system. I have a 20 gig drive, 10 gigs
devoted to windows 98 and 10 gigs devoted to linux. The installation
went ok, but I cannot figure out how to read files that are in my
windows partition in linux. My ISP uses a PPPoE client for the DSL
connections. The linux PPPoE client software is too big for a floppy,
so I need to download it from Windows 98 and bring it into linux.
Again, I am very new, so I really need step-by-step instructions on
how to do this... i'm using the GNOME XWindows system. If someone can
point me to anything on the web that's for total beginners it would be
much appreciated.

2. CL-GD5446 chipset versus S3 Trio64

3. Step-by-step modem setup instructions?

4. searching aix equiv of mcs

5. Where to find step-by-step instructions

6. PPP Dial-Up Help...

7. Solaris 9 Step by Step Installation Instructions : open for comment

8. Linux and high speed IP connections

9. FreeBSD Private Network Natd Gateway Step-by-Step

10. Is there a step-by-step guide to networking win9x to linux?

11. Step by Step AIX printer setting with Samba

12. Step by step for installing network?

13. is there a step by step to setup a little network for COL 2.3?