1. lilo error L BB BB BB BB BB
Hello,
I am trying to install debian potato on an elderly system, where
hda-disk is 120MByte and therefore shall host only the /boot - section,
which is mounted to a
10MByte-Partition (/hda1). The rest resides on hde, which a 30GB-HD on
an
promise-controller.
My Problem: After installing debian with some boot parameters for the
controller
and the hde-disk it boots well from the rescue-floppy, but not from hard
disk.
Lilo hangs, showing on the screen:
L BB BB BB BB
and adding a new "BB" every second.
I checked the geometry of hda against BIOS, fdisk, bootmessage and lilo,
they
are identical. I used another location on /hda (perhaps some blocks are
bad?),
but it didn't help.
Could anyone help? What does the Lilo-Message mean? How can I fix this
problem?
Thanks,
Uwe
My output from lilo -v -v -v is
LILO version 21.5-1 beta, Copyright (C) 1992-1998 Werner Almesberger
'lba32' extensions Copyright (C) 1999,2000 John Coffman
Reading boot sector from /dev/hda
Merging with /boot/boot.b
Device 0x0301: BIOS drive 0x80, 5 heads, 901 cylinders,
53 sectors. Partition offset: 53 sectors.
Secondary loader: 8 sectors.
Device 0x0301: BIOS drive 0x80, 5 heads, 901 cylinders,
53 sectors. Partition offset: 53 sectors.
Boot image: /vmlinuz
Device 0x0301: BIOS drive 0x80, 5 heads, 901 cylinders,
53 sectors. Partition offset: 53 sectors.
Setup length is 8 sectors.
Mapped 0 sectors.
Added Linux *
<dev=0xb0,hd=0,cyl=11,sct=112>
"ro root=2101 BOOT_FILE=/vmlinuz ide2=0x1030,0x1042
ide3=0x1038,0x1046 hde=59554,16,63"
Skipping /vmlinuz.old
/boot/boot.0300 exists - no backup copy made.
Map file size: 13824 bytes.
Writing boot sector.
2. Installing Red-Hat 5.2
3. Accessing Linux from DOS bbs
4. Alsa and ESS688? Does it really work?
5. lilo error L BB BB BB BB
6. setting up x11 and xfree
7. DOS apps running on Linux via Telnet
8. FreeBSD support Colorado 700 Tape backup from parellel port ?
9. Telnet to Linux from DOS system via Serial Port
10. Security workaround needed-Accessing Linux via DOS
11. Limit user to access Linux Box via telnet
12. can't access linux box via telnet
13. Telnet/Rlogin access needed via Apache on Linux
by