Newbie needs to install NIC Red Hat 7.0

Newbie needs to install NIC Red Hat 7.0

Post by Efrain River » Tue, 19 Jun 2001 07:18:22

Can anyone tell me how to install my Intel Pro/10+ card. I need step by step
instructions. Nothing I've tried works. I tried:

insmod eepro

insmod eepro io=210 irq=11

alias eth0 eepro

What am I doing wrong? Why wasn't the NIC recognized during install?


1. Newbie needs help installing Red Hat 7.0

I had an old computer lying around-- an IBM Valuepoint 486 w/ 8 meg ram,
about a 700 meg hd. Installed a cd rom and thought I would give the Linux
discs I had lying around a try. From what I understood, though it wouldn't
be a mean machine, I thought  this configuration would allow me to at least
sample Linux.

Wiped Windows 3.1 off, tried booting from the Linux boot disk. It proceeds
for a while, says it is:

"Running Anaconda .... this may take a while",
"Install exited abnormally- received signal 9"
"Sending termination signals ..... done"
"Disabling swap"
"Unmounting filesystems
/mnt/source unmount failed (16)
"You may safely reboot your system"

And that's it. What am I doing wrong? I've read faqs til my eyes bled, read
through _Teach Yourself Linux_, and I still have no idea what the problem is

TIA, I know this is a pain in the ass ........

2. QMAIL problem

3. Red Hat 7.1 - Installing Red Hat packages after Red Hat is already installed.

4. Broken XGetImage in 3.12?

5. Unable to install NIC Intel Pro/10+ under Red Hat 7.0

6. ANNOUNCEMENT: patch for ip-filter 3.2.10 on Solaris 7/x86 platform

7. need help installing red hat 7.0

8. xdmcp queston...

9. Newbie needs help with NIC and Red Hat 7.2

10. Help supported NIC cards don't work on Red Hat 7.0

11. Red Hat 7.0: Intel Onboard NIC not working

12. Red Hat 7.0 and Linksys NIC / tulip.o woes