1. Connecting two machines:; Client only communicate with server when server continuously pings client.
Server:
Linux 2.0.29
Smc Etherez 8149
Loadable module for smc ultra v2.00
Crossover wires or smc hub and store bought cables
No Dns
No Error messages on boot up
No Error messages in logs
No problems networking locally in the server
No problem pinging the client (Linux/win)
Client:
Linux 2.0.29/Win
3com etherlink3 lan+33.6 3C562D/3C563D (pcmcia)
Pcmcia Card Services v2.9.2 or higher to version that supports the card
specifically.
No Dns
No Error messages on boot up
No Error messages in logs
No problems networking locally in the client
Problem:
Unless the Server is continuously pinging clients ip # ,
the client will comunicate with the server for a few moments, then stop.
Once I start pinging the client from the server they communicate fine.
When I run both machines in win with NetBEUI, it runs as smooth as silk.
Thanks Harley
3. DHCP server and client same machine
5. How to run DHCP server & client on same machine?
6. AS 200 4/233 with 9FX Vision 330 Card
7. DHCP Client and Server, two nics, one Linux machine-->configuration problem
8. Sasteroids 1.5 (with digital sound) released
9. dhcp client and server on same machine
10. DHCP Linux Client at NT-DHCP Server
11. Sunray as DHCP client to NT DHCP server
12. Redhat 9.0 dhcp client & windows 2003 dhcp server: dynamic dns update
13. Setting up a linux dhcp client with a win98 dhcp server??