Very Computer

by **sera..** » Mon, 24 Jun 1996 04:00:00

This may be a dumb question, but anyway. Is it possible (and simple)
to get Linux working with my NW4.10 network using ipxodi?
Thanks
Scott

//

//

by **Uwe Bonn** » Tue, 25 Jun 1996 04:00:00

: This may be a dumb question, but anyway. Is it possible (and simple)
: to get Linux working with my NW4.10 network using ipxodi?
: Thanks
: Scott
:
ncpfs makes it possible to connect with netware. I use it without problems
with netware3.1, also 4.1 seems to have some problems.

--

Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

by **Mike Roberts** » Sun, 14 Jul 1996 04:00:00

>: : This may be a dumb question, but anyway. Is it possible (and simple)
>: : to get Linux working with my NW4.10 network using ipxodi?
>: : Thanks
>: : Scott
>: :
>: ncpfs makes it possible to connect with netware. I use it without problems
>: with netware3.1, also 4.1 seems to have some problems.
>No problems: if you set up your bindery emulation correctly.
>If a NDS connect fails, you get a flat '3.12' alike server modell to
>connect to.
>mfG
> Jojo

This looks like an interesting product. Where can I get it?
Mike

by **Dave Nutta** » Mon, 22 Jul 1996 04:00:00

>>: : This may be a dumb question, but anyway. Is it possible (and
simple)
>>: : to get Linux working with my NW4.10 network using ipxodi?
>>: : Thanks
>>: : Scott
>>: :
>>: ncpfs makes it possible to connect with netware. I use it without
problems
>>: with netware3.1, also 4.1 seems to have some problems.
>>No problems: if you set up your bindery emulation correctly.
>>If a NDS connect fails, you get a flat '3.12' alike server modell to
>>connect to.

>>mfG
>> Jojo

>This looks like an interesting product. Where can I get it?
>Mike

SEE THE LSM THAT FOLLOWS. THERE IS PROBABLY A NEWER VERSION. HOWEVER,
THIS ONE WORKS FINE WITH BOTH 3.12 AND 4.10.

---- start lsm -------Begin3
Title: ncpfs
Version: 0.24
Entered-date: 02. June 1996
Description: With ncpfs you can mount volumes of your netware
server under Linux. You can also print to netware
print queues and spool netware print queues to the
Linux printing system. You need kernel 1.2.x or
1.3.71 and above. ncpfs does NOT work with any 1.3.x
kernel below 1.3.71.
Keywords: filesystem ncp novell netware printing

Lendecke)

Lendecke)
Primary-site: ftp.gwdg.de:/pub/linux/misc/ncpfs
Alternate-site: sunsite.unc.edu:/pub/system/Filesystems/ncpfs
~120k ncpfs-0.24.tgz
~ 1k ncpfs-0.24.lsm
Copying-policy: GPL
End

Very Computer

Linux to Netware 4.10

Linux to Netware 4.10

Linux to Netware 4.10

Linux to Netware 4.10

Linux to Netware 4.10