Very Computer

I installed ucp-snmp using redhat's rpm packages
I also installed mrtg using rpm.

I get the following result:

--base: Vendor Id:
--base: Populating confcache
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
SNMP Error:
no response received
SNMPv1_Session (remote host: "wastiaux4" [127.0.0.1].161)
                  community: "public"
                 request ID: 537389573
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.31.1.1.1.1)
SNMPv1_Session (remote host: "wastiaux4" [127.0.0.1].161)
                  community: "public"
                 request ID: 537389574
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory
sh: /usr/bin/lpstat: No such file or directory

Can someone tell me what's wrong?

both snmpd and snmptrapd daemons are running (
although they might not be correctly configured).

Can someone tell me what's wrong ?

thanks.
--

2 problems exist, one of those is that the default snmpd.conf file is
not setup to allow you to probe the snmpd for info. Might want to
check its config file and make sure your not required to do some vi
editing of variables.

As for the lpstat one, not sure... it obviously might have something
to do it lpd I'd say.

Cheers
Michael