pppd[212]: lcp_reqci: rcvd unknown option 19; pppd[212]: input: Unknown protocol (80fd) received!

pppd[212]: lcp_reqci: rcvd unknown option 19; pppd[212]: input: Unknown protocol (80fd) received!

Post by John D. Griffi » Fri, 24 Feb 1995 00:20:55



I get these messages from pppd 2.1.2 when I connect to my Internet
provider via PPP.  I'm running kernel 1.1.54.  Is this anything to
worry about?  Everything seems to work.  I can ping, telnet, ftp etc
without difficulty.

I get this message once:
pppd[212]: lcp_reqci: rcvd unknown option 19

I get this message multiple times:
pppd[212]: input: Unknown protocol (80fd) received!

Here's log output for anyone who might be able to understand it.

Feb 12 15:48:05 gershwin syslog: Warning - secret file
/etc/ppp/pap-secrets has world and/or group access
Feb 12 15:48:05 gershwin pppd[211]: pppd 2.1.2 started by root, uid 0
Feb 12 15:48:05 gershwin pppd[212]: Connecting with </usr/sbin/chat
-v "" \ "ATQ0V1E0M0&C1&D2" OK ATDT428-3700 CONNECT login>
Feb 12 15:48:06 gershwin chat[213]: send (ATQ0V1E0M0&C1&D2^M)
Feb 12 15:48:06 gershwin chat[213]: expect (OK)
Feb 12 15:48:07 gershwin chat[213]: ^M
Feb 12 15:48:07 gershwin chat[213]: OK -- got it
Feb 12 15:48:07 gershwin chat[213]: send (ATDT428-3700^M)
Feb 12 15:48:07 gershwin chat[213]: expect (CONNECT)
Feb 12 15:48:07 gershwin chat[213]: ^M
Feb 12 15:48:29 gershwin chat[213]: CARRIER 14400^M
Feb 12 15:48:29 gershwin chat[213]: ^M
Feb 12 15:48:29 gershwin chat[213]: PROTOCOL: LAP-M^M
Feb 12 15:48:29 gershwin chat[213]: ^M
Feb 12 15:48:29 gershwin chat[213]: COMPRESSION: V.42BIS^M
Feb 12 15:48:29 gershwin chat[213]: ^M
Feb 12 15:48:29 gershwin chat[213]: CONNECT -- got it
Feb 12 15:48:29 gershwin chat[213]: send (login^M)
Feb 12 15:48:29 gershwin pppd[212]: Connected...
Feb 12 15:48:30 gershwin kernel: ppp: channel ppp0 mtu = 1500, mru =
1500
Feb 12 15:48:30 gershwin kernel: ppp: channel ppp0 open
Feb 12 15:48:30 gershwin pppd[212]: Using interface ppp0
Feb 12 15:48:30 gershwin pppd[212]: Connect: ppp0 <--> /dev/cua2
Feb 12 15:48:30 gershwin pppd[212]: set_xaccm: 00000000 00000000
00000000 60000000
Feb 12 15:48:30 gershwin pppd[212]: send_config: mtu = 1500
Feb 12 15:48:30 gershwin pppd[212]: send_config: asyncmap = ffffffff
Feb 12 15:48:30 gershwin pppd[212]: send_config: flags = f000000
Feb 12 15:48:30 gershwin pppd[212]: recv_config: mru = 1500
Feb 12 15:48:30 gershwin pppd[212]: recv_config: asyncmap = 0
Feb 12 15:48:30 gershwin pppd[212]: recv_config: flags = f000010
Feb 12 15:48:30 gershwin pppd[212]: sent [LCP ConfReq id=0x1 <mru
1500> <magic 0x2f472ac4> <pcomp> <accomp>]
Feb 12 15:48:30 gershwin pppd[212]: fsm_sdata(LCP): Sent code 1, id
1.
Feb 12 15:48:30 gershwin pppd[212]: Timeout 2194:10910 in 3 seconds.
Feb 12 15:48:30 gershwin pppd[212]: Setting itimer for 3 seconds in
timeout.
Feb 12 15:48:30 gershwin pppd[212]: LCP: sending Configure-Request,
id 1
Feb 12 15:48:31 gershwin pppd[212]: IO signal received
Feb 12 15:48:31 gershwin pppd[212]: rcvd [LCP ConfReq id=0x1
<asyncmap 0xa0000> <auth upap> < 13 09 03 00 c0 7b 35 3c eb>] fd 1f
Feb 12 15:48:31 gershwin pppd[212]: fsm_rconfreq(LCP): Rcvd id 1.
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: rcvd ASYNCMAP
Feb 12 15:48:31 gershwin pppd[212]: (a0000)
Feb 12 15:48:31 gershwin pppd[212]:  (ACK)
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: rcvd AUTHTYPE
Feb 12 15:48:31 gershwin pppd[212]: (c023)
Feb 12 15:48:31 gershwin pppd[212]:  (ACK)

# here's the first message

Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: rcvd unknown option 19
Feb 12 15:48:31 gershwin pppd[212]:  (REJ)
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: returning CONFREJ.
Feb 12 15:48:31 gershwin pppd[212]: sent [LCP ConfRej id=0x1 < 13 09
03 00 c0 7b 35 3c eb>]
Feb 12 15:48:31 gershwin pppd[212]: fsm_sdata(LCP): Sent code 4, id
1.
Feb 12 15:48:31 gershwin pppd[212]: IO signal received
Feb 12 15:48:31 gershwin pppd[212]: rcvd [LCP ConfAck id=0x1 <mru
1500> <magic 0x2f472ac4> <pcomp> <accomp>] 7f 3b
Feb 12 15:48:31 gershwin pppd[212]: fsm_rconfack(LCP): Rcvd id 1.
Feb 12 15:48:31 gershwin pppd[212]: IO signal received
Feb 12 15:48:31 gershwin pppd[212]: rcvd [LCP ConfReq id=0x2
<asyncmap 0xa0000> <auth upap>] 04 43
Feb 12 15:48:31 gershwin pppd[212]: fsm_rconfreq(LCP): Rcvd id 2.
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: rcvd ASYNCMAP
Feb 12 15:48:31 gershwin pppd[212]: (a0000)
Feb 12 15:48:31 gershwin pppd[212]:  (ACK)
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: rcvd AUTHTYPE
Feb 12 15:48:31 gershwin pppd[212]: (c023)
Feb 12 15:48:31 gershwin pppd[212]:  (ACK)
Feb 12 15:48:31 gershwin pppd[212]: lcp_reqci: returning CONFACK.
Feb 12 15:48:31 gershwin pppd[212]: sent [LCP ConfAck id=0x2
<asyncmap 0xa0000> <auth upap>]
Feb 12 15:48:31 gershwin pppd[212]: fsm_sdata(LCP): Sent code 2, id
2.
Feb 12 15:48:31 gershwin pppd[212]: Untimeout 2194:10910.
Feb 12 15:48:31 gershwin pppd[212]: Setting itimer for 0 seconds in
untimeout.
Feb 12 15:48:31 gershwin pppd[212]: send_config: mtu = 1500
Feb 12 15:48:31 gershwin pppd[212]: send_config: asyncmap = a0000
Feb 12 15:48:31 gershwin pppd[212]: send_config: flags = f000010
Feb 12 15:48:31 gershwin pppd[212]: recv_config: mru = 1500
Feb 12 15:48:31 gershwin pppd[212]: recv_config: asyncmap = 0
Feb 12 15:48:31 gershwin pppd[212]: recv_config: flags = f000000
Feb 12 15:48:31 gershwin pppd[212]: sent [PAP AuthReq id=0x1
user="pp001896" password="XXXXXXX"]
Feb 12 15:48:31 gershwin pppd[212]: upap_sauth: Sent id 1.
Feb 12 15:48:31 gershwin pppd[212]: Timeout 7220:11178 in 10 seconds.
Feb 12 15:48:31 gershwin pppd[212]: Setting itimer for 10 seconds in
timeout.
Feb 12 15:48:41 gershwin pppd[212]: Alarm
Feb 12 15:48:41 gershwin pppd[212]: sent [PAP AuthReq id=0x2
user="pp001896" password="XXXXXXXX"]
Feb 12 15:48:41 gershwin pppd[212]: upap_sauth: Sent id 2.
Feb 12 15:48:41 gershwin pppd[212]: Timeout 7220:11178 in 10 seconds.
Feb 12 15:48:41 gershwin pppd[212]: Setting itimer for 10 seconds in
timeout.
Feb 12 15:48:41 gershwin pppd[212]: IO signal received
Feb 12 15:48:41 gershwin pppd[212]: rcvd [PAP AuthAck id=0x2msg=""]
30 15
Feb 12 15:48:41 gershwin pppd[212]: upap_rauthack: Rcvd id 2.
Feb 12 15:48:41 gershwin pppd[212]: Remote message:
Feb 12 15:48:41 gershwin pppd[212]: sent [IPCP ConfReq id=0x1 <addr
0.0.0.0> <compress VJ 0f 01>]
Feb 12 15:48:41 gershwin pppd[212]: fsm_sdata(IPCP): Sent code 1, id
1.
Feb 12 15:48:41 gershwin pppd[212]: Timeout 2194:114e0 in 3 seconds.
Feb 12 15:48:41 gershwin pppd[212]: Setting itimer for 3 seconds in
timeout.
Feb 12 15:48:41 gershwin pppd[212]: IPCP: sending Configure-Request,
id 1
Feb 12 15:48:41 gershwin pppd[212]: rcvd [proto=0x80fd] 01 01 00 0a
11 06 00 01 01 03 b0 31

# Here's the 2nd message - it repeats several times with different
# codes and ids until I finally connect at the end.

Feb 12 15:48:41 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:41 gershwin pppd[212]: sent [LCP ProtRej id=0x2 80 fd 01
01 00 0a 11 06 00 01 01 03 b0 31]
Feb 12 15:48:41 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
2.
Feb 12 15:48:41 gershwin pppd[212]: IO signal received
Feb 12 15:48:42 gershwin kernel: ppp: channel ppp0 going up for IP
packets!
Feb 12 15:48:41 gershwin pppd[212]: rcvd [IPCP ConfReq id=0x1
<compress VJ 0f 00> <addr 38.145.212.110>] 4a 15
Feb 12 15:48:41 gershwin pppd[212]: fsm_rconfreq(IPCP): Rcvd id 1.
Feb 12 15:48:41 gershwin pppd[212]: ipcp: received COMPRESSTYPE
Feb 12 15:48:41 gershwin pppd[212]: (45)
Feb 12 15:48:41 gershwin pppd[212]:  (ACK)
Feb 12 15:48:41 gershwin pppd[212]: ipcp: received ADDR
Feb 12 15:48:41 gershwin pppd[212]: (38.145.212.110)
Feb 12 15:48:41 gershwin pppd[212]:  (ACK)
Feb 12 15:48:41 gershwin pppd[212]: ipcp: returning Configure-ACK
Feb 12 15:48:41 gershwin pppd[212]: sent [IPCP ConfAck id=0x1
<compress VJ 0f 00> <addr 38.145.212.110>]
Feb 12 15:48:41 gershwin pppd[212]: fsm_sdata(IPCP): Sent code 2, id
1.
Feb 12 15:48:41 gershwin pppd[212]: IO signal received
Feb 12 15:48:41 gershwin pppd[212]: rcvd [IPCP ConfNak id=0x1 <addr
38.10.212.199> <compress VJ 0f 00>] 7e d4
Feb 12 15:48:41 gershwin pppd[212]: fsm_rconfnakrej(IPCP): Rcvd id 1.
Feb 12 15:48:41 gershwin pppd[212]: local IP address 38.10.212.199
Feb 12 15:48:41 gershwin pppd[212]: Untimeout 2194:114e0.
Feb 12 15:48:41 gershwin pppd[212]: Setting itimer for 10 seconds in
untimeout.
Feb 12 15:48:41 gershwin pppd[212]: sent [IPCP ConfReq id=0x2 <addr
38.10.212.199> <compress VJ 0f 00>]
Feb 12 15:48:41 gershwin pppd[212]: fsm_sdata(IPCP): Sent code 1, id
2.
Feb 12 15:48:41 gershwin pppd[212]: Timeout 2194:114e0 in 3 seconds.
Feb 12 15:48:41 gershwin pppd[212]: Setting itimer for 3 seconds in
timeout.
Feb 12 15:48:41 gershwin pppd[212]: IPCP: sending Configure-Request,
id 2
Feb 12 15:48:42 gershwin pppd[212]: IO signal received
Feb 12 15:48:42 gershwin pppd[212]: rcvd [IPCP ConfAck id=0x2 <addr
38.10.212.199> <compress VJ 0f 00>] 10 82
Feb 12 15:48:42 gershwin pppd[212]: fsm_rconfack(IPCP): Rcvd id 2.
Feb 12 15:48:42 gershwin pppd[212]: Untimeout 2194:114e0.
Feb 12 15:48:42 gershwin pppd[212]: Setting itimer for 9 seconds in
untimeout.
Feb 12 15:48:42 gershwin pppd[212]: ipcp: up
Feb 12 15:48:42 gershwin pppd[212]: local  IP address 38.10.212.199
Feb 12 15:48:42 gershwin pppd[212]: remote IP address 38.145.212.110
Feb 12 15:48:42 gershwin pppd[212]: Script /etc/ppp/ip-up started;
pid = 214
Feb 12 15:48:42 gershwin pppd[212]: IO signal received
Feb 12 15:48:42 gershwin pppd[212]: rcvd [proto=0x80fd] 01 02 00 0a
11 06 00 01 01 03 b7 e7
Feb 12 15:48:42 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:42 gershwin pppd[212]: sent [LCP ProtRej id=0x3 80 fd 01
02 00 0a 11 06 00 01 01 03 b7 e7]
Feb 12 15:48:42 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
3.
Feb 12 15:48:43 gershwin pppd[212]: IO signal received
Feb 12 15:48:43 gershwin pppd[212]: rcvd [proto=0x80fd] 01 03 00 0a
11 06 00 01 01 03 4a aa
Feb 12 15:48:43 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:43 gershwin pppd[212]: sent [LCP ProtRej id=0x4 80 fd 01
03 00 0a 11 06 00 01 01 03 4a aa]
Feb 12 15:48:43 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
4.
Feb 12 15:48:44 gershwin pppd[212]: IO signal received
Feb 12 15:48:44 gershwin pppd[212]: rcvd [proto=0x80fd] 01 04 00 0a
11 06 00 01 01 03 a8 43
Feb 12 15:48:44 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:44 gershwin pppd[212]: sent [LCP ProtRej id=0x5 80 fd 01
04 00 0a 11 06 00 01 01 03 a8 43]
Feb 12 15:48:44 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
5.
Feb 12 15:48:45 gershwin pppd[212]: IO signal received
Feb 12 15:48:45 gershwin pppd[212]: rcvd [proto=0x80fd] 01 05 00 0a
11 06 00 01 01 03 55 0e
Feb 12 15:48:45 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:45 gershwin pppd[212]: sent [LCP ProtRej id=0x6 80 fd 01
05 00 0a 11 06 00 01 01 03 55 0e]
Feb 12 15:48:45 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
6.
Feb 12 15:48:46 gershwin pppd[212]: IO signal received
Feb 12 15:48:46 gershwin pppd[212]: rcvd [proto=0x80fd] 01 06 00 0a
11 06 00 01 01 03 52 d8
Feb 12 15:48:46 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:46 gershwin pppd[212]: sent [LCP ProtRej id=0x7 80 fd 01
06 00 0a 11 06 00 01 01 03 52 d8]
Feb 12 15:48:46 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
7.
Feb 12 15:48:47 gershwin pppd[212]: IO signal received
Feb 12 15:48:47 gershwin pppd[212]: rcvd [proto=0x80fd] 01 07 00 0a
11 06 00 01 01 03 af 95
Feb 12 15:48:47 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:47 gershwin pppd[212]: sent [LCP ProtRej id=0x8 80 fd 01
07 00 0a 11 06 00 01 01 03 af 95]
Feb 12 15:48:47 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
8.
Feb 12 15:48:48 gershwin pppd[212]: IO signal received
Feb 12 15:48:48 gershwin pppd[212]: rcvd [proto=0x80fd] 01 08 00 0a
11 06 00 01 01 03 87 03
Feb 12 15:48:48 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:48 gershwin pppd[212]: sent [LCP ProtRej id=0x9 80 fd 01
08 00 0a 11 06 00 01 01 03 87 03]
Feb 12 15:48:48 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
9.
Feb 12 15:48:49 gershwin pppd[212]: IO signal received
Feb 12 15:48:49 gershwin pppd[212]: rcvd [proto=0x80fd] 01 09 00 0a
11 06 00 01 01 03 7a 4e
Feb 12 15:48:49 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:49 gershwin pppd[212]: sent [LCP ProtRej id=0xa 80 fd 01
09 00 0a 11 06 00 01 01 03 7a 4e]
Feb 12 15:48:49 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
10.
Feb 12 15:48:50 gershwin pppd[212]: IO signal received
Feb 12 15:48:50 gershwin pppd[212]: rcvd [proto=0x80fd] 01 0a 00 0a
11 06 00 01 01 03 7d 98
Feb 12 15:48:50 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:50 gershwin pppd[212]: sent [LCP ProtRej id=0xb 80 fd 01
0a 00 0a 11 06 00 01 01 03 7d 98]
Feb 12 15:48:50 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
11.
Feb 12 15:48:51 gershwin pppd[212]: Alarm
Feb 12 15:48:51 gershwin pppd[212]: IO signal received
Feb 12 15:48:51 gershwin pppd[212]: rcvd [proto=0x80fd] 01 0b 00 0a
11 06 00 01 01 03 80 d5
Feb 12 15:48:51 gershwin pppd[212]: input: Unknown protocol (80fd)
received!
Feb 12 15:48:51 gershwin pppd[212]: sent [LCP ProtRej id=0xc 80 fd 01
0b 00 0a 11 06 00 01 01 03 80 d5]
Feb 12 15:48:51 gershwin pppd[212]: fsm_sdata(LCP): Sent code 8, id
12.
Feb 12 15:58:54 gershwin su: john on /dev/tty2

# at this point, I can ping, telent, ftp etc. without problem.

# shutdown phase follows

Feb 12 16:07:14 gershwin pppd[212]: Interrupt received: terminating
link
Feb 12 16:07:14 gershwin pppd[212]: ipcp: down
Feb 12 16:07:14 gershwin pppd[212]: Script /etc/ppp/ip-down started;
pid = 307
Feb 12 16:07:14 gershwin pppd[212]: send_config: mtu = 1500
Feb 12 16:07:14 gershwin pppd[212]: send_config: asyncmap = ffffffff
Feb 12 16:07:14 gershwin pppd[212]: send_config: flags = f000004
Feb 12 16:07:14 gershwin pppd[212]: recv_config: mru = 1500
Feb 12 16:07:14 gershwin pppd[212]: recv_config: asyncmap = 0
Feb 12 16:07:14 gershwin pppd[212]: recv_config: flags = f000014
Feb 12 16:07:14 gershwin pppd[212]: sent [LCP TermReq id=0xd]
Feb 12 16:07:14 gershwin pppd[212]: fsm_sdata(LCP): Sent code 5, id
13.
Feb 12 16:07:14 gershwin pppd[212]: fsm_sdata(LCP): Sent code 5, id
13.
Feb 12 16:07:14 gershwin pppd[212]: Timeout 2194:10910 in 3 seconds.
Feb 12 16:07:14 gershwin pppd[212]: Setting itimer for 3 seconds in
timeout.
Feb 12 16:07:14 gershwin kernel: ppp: channel ppp0 going down for IP
packets!
Feb 12 16:07:17 gershwin pppd[212]: Alarm
Feb 12 16:07:17 gershwin pppd[212]: sent [LCP TermReq id=0xe]
Feb 12 16:07:17 gershwin pppd[212]: fsm_sdata(LCP): Sent code 5, id
14.
Feb 12 16:07:17 gershwin pppd[212]: fsm_sdata(LCP): Sent code 5, id
14.
Feb 12 16:07:17 gershwin pppd[212]: Timeout 2194:10910 in 3 seconds.
Feb 12 16:07:17 gershwin pppd[212]: Setting itimer for 3 seconds in
timeout.
Feb 12 16:07:19 gershwin kernel: ppp: channel ppp0 closing.
Feb 12 16:07:19 gershwin pppd[212]: Hangup (SIGHUP)
Feb 12 16:07:19 gershwin pppd[212]: Hangup (SIGHUP)
Feb 12 16:07:19 gershwin pppd[212]: Untimeout 2194:10910.
Feb 12 16:07:19 gershwin pppd[212]: Setting itimer for 0 seconds in
untimeout.
Feb 12 16:07:19 gershwin pppd[212]: ioctl(PPPIOCGDEBUG): I/O error
Feb 12 16:07:19 gershwin pppd[212]: ioctl(TIOCSETD): I/O error
Feb 12 16:07:19 gershwin pppd[212]: ioctl(TIOCNXCL): I/O error
Feb 12 16:07:19 gershwin pppd[212]: tcsetattr: I/O error
Feb 12 16:07:19 gershwin pppd[212]: Exit.

---------------------------------------------------------------------
John D. Griffith           email: ekx400.jgrif...@kodako.kodak.com
Optical Design Dept.       2nd email: pp001...@interramp.com
Eastman Kodak Company      PROFS: VXOPTA(GRIFFITH)
Rochester, NY  14653-5225  Telephone: +1 716-726-3142  
FAX +1 716-253-1012

 
 
 

1. PPP says "ERROR: Unknown Protocol (80fd) received"

: Please, does anybody know what to do about the following:

: When trying to connect to my local friendly Internet Service Provider
: the modem dials up, logs in, runs PPP on the server, packets
: start flowing... then it stops.

: /var/adm/syslog says "ERROR: Unknown Protocol (80fd) received"

: Doing netstat -r shows nothing (netstat hangs).

: I've tried this with two different ISP's with similar effect (the other
: one [PIPEX DIAL] had "Unknown Protocol (8029) received".

: I've checked that the MRU size is 1500.

: Any help gratefully appreciated here or at


        I know this isn't the reply that you were looking for....but
you see I have the same problem and nobody seems to have the answer
or is willing to help.  
        If you hear from anybody about the problem please let me know.
meanwhile, I'm working to find the problem myself, been at it for three weeks
now (reassuring isn't it?).  I've copied your address down...if I make a break
through, I'll let you know

                        Steve  

2. ppp and ipnat questions (warning: newbie alert)

3. Modem is Locked?

4. pppd: Unknown protocol (0x8029) received

5. LILO drives me crazy.. plz,Help!!!

6. pppd problem connecting: "unknown protocol received"

7. telnet to a certain machine logs me out

8. Western Digital 212 MEG Hard Drives **NICE PRICE**!!!

9. RESULT: comp.programming.contests passes 212:30

10. US-NY (212) Disaster Recovery Specialist

11. apm + acer travelmate 212 tx

12. Epson DYO 212 PCMCIA reader for desktops?