Very Computer

I am setting up a Compaq ML370 server with a Smart 5302 RAID controller and
3 36GB disks, but this is not exactly going my way. The installation is
defaulting to a NCR ??53XX?? controller (SCSI) but my Comapq controller
needs some special driver to work properly so this causes the server to
crash right after I partition the disk. I've made one logical volume on 72GB
with the hardware raid controller and is partitioning this in smaller
partitions during installation. Right after I define the partitions and then
press Next, the server goes down.

Have any of you guys any experience with these kinda problemes or atleast
know here I can turn to for help?

Thanks in advance.

Tom Braathen

Last I saw Compaq had a special config area on their web page for doing
Linux on their boxes.  Best try compaq.com/support and see what they have to
say.

Doug

Quote:> Hey!

> I am setting up a Compaq ML370 server with a Smart 5302 RAID controller
and
> 3 36GB disks, but this is not exactly going my way. The installation is
> defaulting to a NCR ??53XX?? controller (SCSI) but my Comapq controller
> needs some special driver to work properly so this causes the server to
> crash right after I partition the disk. I've made one logical volume on
72GB
> with the hardware raid controller and is partitioning this in smaller
> partitions during installation. Right after I define the partitions and
then
> press Next, the server goes down.

> Have any of you guys any experience with these kinda problemes or atleast
> know here I can turn to for help?

> Thanks in advance.

> Tom Braathen