Hi !
Can anybody tell me how to configure the TELES 16.3 ISDN
internal card in Linux.
Or if there is an ISDN how to out there and where can i find it.
Thank you in advance
Sasa
by Sasa Ostrousk » Wed, 07 Apr 1999 04:00:00
Thank you in advance
Sasa
by Erik Hense » Thu, 08 Apr 1999 04:00:00
--
1. PPP with an ISDN card? (Teles 16.3 PnP)
I'm somewhat new to Linux (i've played with it before but never really
got serious until i managed to get a 2.1x kernel with support for my
isdn card) and I can't find a howto on PPP over isdn (unless it is for
ISDN modems using serial ports).
help!
this is what i get at boot-up (the isdn section):
ISDN subsystem Rev: 1.44/1.41/1.44/1.27/1.8
HiSax: Driver for Siemens chip set ISDN cards
HiSax: Version 2.1
HiSax: Revisions 1.15/1.10/1.10/1.30/1.8
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles IO driver Rev. 1.11
Teles: 16.3 Byte at d80 is ff
HiSax: Card Teles 16.3 not installed !
I really don't get this!
suggestions are welcome, i'm completely in the dark here... someone save
me from having to use windoze...
2. XFree86-1.3 files are corrupted!
3. ISDN card Teles 16.3 configuration
5. Teles 16.3 ISDN Card - Setup problem
6. Extracting multiple tar files?
7. Teles 16.3 ISDN Card - Setup
9. Problem with ISDN - Teles 16.3 card
10. Hisax module won't work(Teles 16.3 isdn card)!?!
11. Does Linux support the TELES BRI/16.3 ISDN card?
12. ne2000 card and Teles 16.3 card down work dogether
13. Teles 16.3 Pasive ISDN adapter