Very Computer

1. RH 6.1 freezing when "shutting down interface eth0"

I have RH 6.1 running on a Pentium Pro 180, with a 3Com Etherlink XL NIC.
Everything is OK except when shutting down it freezes on "shutting down
interface eth0", even though no problems are reported on startup when
starting eth0.

I noticed that the PCMCIA service is started after eth0, and since this is a
desktop PC (no PCMCIA) I thought this might cause the problem. When I
checked in etc/sysconfig/pcmcia the PCMCIA parameter is "NO".

Therefore, my questions:

- what could be causing the freeze when "shutting down interface eth0" ?
- could it be the PCMCIA service starting after eth0 ?
- if so, why is the PCMCIA service begin started even if PCMCIA=NO in
etc/sysconfig/pcmcia ? How can I disable the PCMCIA service ?

Thanks,

--
Kevin McBrearty
ATG Automation Technologies Group Ltd.

2. NIS+ YP , NYS need Help I'm DYING!

3. Shutting down RH 6.1 with a PCMCIA network card?

4. Intel Madrona/Balboa

5. Mandrake 8.1 shutdown hangs on shutting down interface eth0 (?)

6. Questions about ssh

7. Shutting Down Interface Eth0 Problem

8. World Linux Day -- 17 September

9. mdk shutdown hangs on shutting down interface eth0

10. eth0 shuts down with NETDEV WATCHDOG: eth0: transmit timed out error.

11. RH 6.1 and Mandrake 6.1 Freeze on Install

12. newbie: SuSE 6.1 eth0 interface driver module setup

13. RS/6000 43P-133: System hangs when shutting down eth0