HELP Intel EtherExpress Pro/10: Network unreachable

HELP Intel EtherExpress Pro/10: Network unreachable

Post by Andreas Hockam » Sat, 20 Jan 1996 04:00:00



Hi,

I've an Intel EtherExpress Pro/10 lancard and get a Network unreachable.
I have an ISDN router connected via twisted pair to my P75.

Distribution: S.U.S.E November Version, Slackware, Kernel 1.2.13

IRQ: 10
BaseAddr: 0x350

set -x in /etc/rc.d/erc/inet1 prints:
++ cat /etc/HOSTNAME
+ HOSTNAME=ipc2anh.bbn.hp.com
+ /sbin/ifconfig lo 127.0.0.1
+ /sbin/route add -net 127.0.0.0
+ IPADDR=15.124.141.59
+ NETMASK=255.255.248.000
+ NETWORK=15.124.136.0
+ BROADCAST=15.124.143.255
+ GATEWAY=15.124.141.57
+ NETTYPE=eth0
+ /sbin/ifconfig eth0 15.124.141.59 broadcast 15.124.143.255 netmask
255.255.248
000
SIOCSIFADDR: No such device
SIOCSIFBRDADDR: No such device
SIOCSIFNETMASK: No such device
+ /sbin/route add -net 15.124.136.0 netmask 255.255.248.000 dev eth0
SIOCADDRT: Invalid argument
+ /sbin/route add default gw 15.124.141.57 metric 1
SIOCADDRT: Network is unreachable

Can anybody help me?

     Andreas

 
 
 

1. Install Intel EtherExpress Pro 10/10+ ISA card on Redhat 6.1 ---Please help

Hi,

I installed RedHat 6.1 on my PC(dual boot 98/Linux). Everything is fine
exception the RedHat can't recognize my ethernet card( Intel
EtherExpress ISA Pro 10/10+). The card works fine in 98.

During the installation, RedHat couldn't detect my card at all. So I
tried to load it manually. I tried two ways:
1. I put ether=5,0x210,0,0,eth0 ( the conf in my 98) in lilo.conf, then
reboot the machine. During the boot, lilo couldn't start eth0.
2. I run lsmod, I found nothing there. I do have
/lib/modules/2.2.12-20/net/eexpro.o file, so I said insmod eexpro. The
linux hangs forever. I have to power off the machine.

What did I do wrong? Please help!

Regards,
Michael

* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!

2. Debian 3.0: can't build a kernel module.

3. Intel EtherExpress Pro/10 ISA network adaptor

4. How do I delete files w/control char embedded in file name?

5. Three Network-Cards INTEL ETHEREXPRESS PRO/10 ISA

6. RS/6000 3BT

7. Announcing revision of beta driver for Intel EtherExpress pro/10 network card

8. Install question : logical drives

9. Announcing new beta driver for Intel EtherExpress pro/10 network card

10. Intel EtherExpress PRO 10 NIC, please help

11. Help with @HOME internet / Intel EtherExpress PRO 10

12. Need help setting up eth0 on an Intel EtherExpress Pro 10+

13. Cable modem/Intel Etherexpress PRO/10 help