3c509b optimized kernel driver

3c509b optimized kernel driver

Post by Yves Joose » Tue, 19 Mar 1996 04:00:00



Yp,

Anybody knows how to quick fix the 3c509 driver to make it use the much
larger buffer on the 3c509b?

                                Yves

 
 
 

1. kernel w/3c509b driver problems

I'm running Slackware 8.0 on a 486/66 DX machine, and I just got an
Etherlink III ISA 10baseT/10base2 (BNC) combo card.  I've tried compiling
two kernels, 2.2.19 and 2.4.9, with the driver for this card, and when I try
to boot the newly compiled kernel, it says "Error 0x40".  I have disabled
PnP on the card, set everything up (using the DOS install disk) so that
there're no conflicts, but it still gives me that same error.  Any ideas?

Thanks
-Jason-

2. aix samba compile error

3. 3c509B problem - can't detect; PNP disabled, driver in kernel

4. Dailin & Dailout?

5. 3Com 3c509B vs 3c509B-TP

6. About Sun Fire x2100 and IPMI

7. Question on optimizing drivers in 64 bit Solaris 7

8. I need to put Tulip drivers in - recompile??

9. SIS7012/K7S5A: ALSA, Kernel driver, SIS's driver... best driver choice?

10. "uname -p" prints unknown for Athlon K7 optimized kernel?

11. Athlon + Athlon optimized kernel => _mmx_mmcpy problems

12. 3C509b driver

13. Help: 3com 3c509B etherlink III: Driver loads but ????