PPPD - Netscape returns error - TCP Error: No Route to Host

PPPD - Netscape returns error - TCP Error: No Route to Host

Post by <jungle.. » Wed, 07 Jul 1999 04:00:00



Hi All,

I can connect to my ISP (using KPPPD), but I can not do anything else. I
can ping number addresses but no name addresses. What to do?

All help appreciated -

Jim


P.S. Here is some info about my system: Redhat  - 2.2.5.22

kppp version 1.6.14

pppd version 2.3.7

Linux linux.gac.com 2.2.5-22 #1 Wed Jun 2 09:17:03 EDT 1999 i686 unknown

/var/log/message
Jul  6 00:01:35 linux pppd[1059]: pppd 2.3.7 started by root, uid 0
Jul  6 00:01:35 linux pppd[1059]: Using interface ppp0
Jul  6 00:01:35 linux pppd[1059]: Connect: ppp0 <--> /dev/ttyS1
Jul  6 00:01:36 linux pppd[1059]: Remote message: Welcome to the EarthLink
Jul  6 00:01:36 linux kernel: PPP BSD Compression module registered
Jul  6 00:01:36 linux kernel: PPP Deflate Compression module registered
Jul  6 00:01:36 linux pppd[1059]: local  IP address 208.252.226.160
Jul  6 00:01:36 linux pppd[1059]: remote IP address 206.115.157.196

Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
206.115.157.196 0.0.0.0         255.255.255.255 UH        0 0          0
ppp0
129.0.0.7       0.0.0.0         255.255.255.255 UH        0 0          0
eth0
129.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0
eth0
127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo
0.0.0.0         206.115.157.196 0.0.0.0         UG        0 0          0
ppp0
0.0.0.0         129.255.255.254 0.0.0.0         UG        0 0          0
eth0

------------------  Posted via SearchLinux  ------------------
                  http://www.searchlinux.com

 
 
 

PPPD - Netscape returns error - TCP Error: No Route to Host

Post by Flavio Curt » Wed, 07 Jul 1999 04:00:00


Quote:> can ping number addresses but no name addresses. What to do?

what about configuring name-server ??
/etc/resolv.conf
domain myprovider.com
nameserver 192.168.0.1 -> IP of primary DNS
nameserver 192.168.0.2 -> IP of secondary DNS

/etc/host.conf
order hosts,bind
multi on

hope this helps

 
 
 

PPPD - Netscape returns error - TCP Error: No Route to Host

Post by <jungle.. » Wed, 07 Jul 1999 04:00:00


Flavio,

  Thanks for the help. I'm a little bit of a "newbie" at this. I made the
  changes you suggested - They helped but I still having some problems -
And
  they seem to
  be sporadic. I actually am not too successful at pinging. Sometimes it
works
  but for the most part it fails.


  NcFTP 3.0.0 beta 18 (February 19, 1999) by Mike Gleason.
  Could not connect to 195.37.76.19: No route to host
  Could not open host ftp.fokus.gmd.de: could not connect to remote host.

  I discovered that "named" was running and stopped it - Seemed to help a
  little. If I do a nslookup and then use Netscape, I sometimes get
through. Any

  ideas?

  Regards,

  Jim


> > can ping number addresses but no name addresses. What to do?
> what about configuring name-server ??
> /etc/resolv.conf
> domain myprovider.com
> nameserver 192.168.0.1 -> IP of primary DNS
> nameserver 192.168.0.2 -> IP of secondary DNS

> /etc/host.conf
> order hosts,bind
> multi on

> hope this helps

------------------  Posted via SearchLinux  ------------------
                  http://www.searchlinux.com
 
 
 

PPPD - Netscape returns error - TCP Error: No Route to Host

Post by Clarence Riddl » Fri, 09 Jul 1999 04:00:00


You'll need to configure DNS.

cgr


> Hi All,

> I can connect to my ISP (using KPPPD), but I can not do anything else. I

> can ping number addresses but no name addresses. What to do?

> All help appreciated -

> Jim


> P.S. Here is some info about my system: Redhat  - 2.2.5.22

> kppp version 1.6.14

> pppd version 2.3.7

> Linux linux.gac.com 2.2.5-22 #1 Wed Jun 2 09:17:03 EDT 1999 i686 unknown

> /var/log/message

> Jul  6 00:01:35 linux pppd[1059]: pppd 2.3.7 started by root, uid 0

> Jul  6 00:01:35 linux pppd[1059]: Using interface ppp0

> Jul  6 00:01:35 linux pppd[1059]: Connect: ppp0 <--> /dev/ttyS1

> Jul  6 00:01:36 linux pppd[1059]: Remote message: Welcome to the EarthLink

> Jul  6 00:01:36 linux kernel: PPP BSD Compression module registered

> Jul  6 00:01:36 linux kernel: PPP Deflate Compression module registered

> Jul  6 00:01:36 linux pppd[1059]: local  IP address 208.252.226.160

> Jul  6 00:01:36 linux pppd[1059]: remote IP address 206.115.157.196

> Kernel IP routing table

> Destination     Gateway         Genmask         Flags   MSS Window  irtt

> Iface

> 206.115.157.196 0.0.0.0         255.255.255.255 UH        0 0          0

> ppp0

> 129.0.0.7       0.0.0.0         255.255.255.255 UH        0 0          0

> eth0

> 129.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0

> eth0

> 127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo

> 0.0.0.0         206.115.157.196 0.0.0.0         UG        0 0          0

> ppp0

> 0.0.0.0         129.255.255.254 0.0.0.0         UG        0 0          0

> eth0

> ------------------  Posted via SearchLinux  ------------------
>                   http://www.searchlinux.com

 
 
 

1. TCP Error: No route to host (in Netscape)

I am running Netscape ver 3.01 with RedHat 4.0

I can access various web sites but when I try to read/send mail /news
I receive the error message  TCP Error: No route to host

I have set the news and mail options in Netscape just as I have them
in a the Netscape I have running under Win 3.1.  The Win 3.1 Netscape
runs without a hitch but this Linux version has this problem.

How do I set the route information that TCP is looking for?

Any suggestions are welcomed...  TIA


Ben Goble  Lakewood  Colorado USA
--
Ben Goble  \  Lakewood,  CO  USA

A Stranger and Pilgrim on the Earth.

2. Newbie video camera question

3. Netscape "TCP error: No route to host" w/ Red Hat 6.0

4. SuSE fixes for KDE 3.03, jpeg, and login manager settings.

5. HELP: e-mail error: host name configuration error -- Returned mail: Service unavailable

6. PS/2 Bus Mouse with Slackware and X

7. ipmasq: TCP Error: No route to host.

8. Large IDE HDDs

9. What does TCP/IP error "No route to host" mean?

10. No outgoing mail: TCP Error: no route to host

11. TCP Error: No Route to Host

12. No Route to Host errors dialing out (ppp --> netscape)

13. OpenSuse 11.1 Kinternet error: "pppd[0] died: pppd options error (exit code 2)